ClearSonic IsoPac B Drum Isolation Package

(1)A5-6,(6)AX12,(3)S5-2,(4)S2,(1)STC5,(2)STS5,FAN

Complete drum enclosure package with 6' high ceiling

Isolate the drum sound from the rest of the band using the ClearSonic IsoPac system. ClearSonic IsoPac systems combine acrylic shields with SORBER absorption baffles to create portable isobooths. ClearSonic Panels fold accordion-style and SORBER baffles fold in half so they are portable and easy to set up.

What are SORBER absorption baffles? They are very light-weight foam panels that soak up reflected and direct sound. Soaking up stray sound helps keep the kit from sounding “roomier” than desired. There are three sizes of SORBER absorption baffles. The S5-2L model is 5 ½’ tall by 4’ wide. The S4-2L is a smaller version of the S5-2L. The smallest model is the S2 SORBER, and is 2’ by 2’. The S2 SORBER can be used as wall treatments for studios, basements, church sanctuaries, etc. to soak up sound that might be bouncing around the room. They can also be applied to the ClearSonic Panels by using included velcro patches.

What are ClearSonic panels? They are durable, acrylic panels that provide acoustic separation between instruments – either on stage or in the studio. They help reduce drum bleed into vocal or instrument mics, as well as lower stage volume, allowing everyone to hear themselves better. These panels feature full-length “accordian style” hinges. These hinges allow the panels to fold in half, making transportation and storage much easier. There are no gaps between the panels for sound to escape. Cable cut-outs between panels are standard, so your set-up won’t be compromised . Model A5-6 is a set of six 5 ½’ high by 2’ wide panels. AX-12 and AX-18 height extension panels are 12” and 18” panels, respectively, that can be added to the top of your ClearSonic Panels to boost the height of your IsoPac system.

The Sorber Lid Systems (to be used with an IsoPac system with 5 ClearSonic panels or more) substantially reduce sound that would normally escape up and out the top of the enclosure. A lightweight yet sturdy telescoping aluminum bar supports the three Sorber Lid panels. The Lid is especially helpful if you have a room with high, hard ceilings. ClearSonic Lid systems and IsoPacs are easy to get in and out of. Since SORBER panels don't actually connect to the ClearSonic Panels, you can simply use one side of an S5-2 (two sections hinged together) as a “door”.

The B Version of the IsoPac system features the ClearSonic Lid System described above. IsoPac A includes (1) A5-6 (6 ClearSonic Panels), (6) AX 12 height extenders (extending the height of the system one full foot), (3) S5-2L regular SORBER absorption panels, (1) STC5L center lid section, (2) STS5L trapezoid lid panels, (1) FAN to keep the booth IsoPac booth cool.

This LG verison comes in light grey. When assembled, the IsoPac B has a diameter of approximately 6.5 feet.