Electro-Voice N/D367 S Microphone

Dynamic Supercardioid Vocal Mic with Switch

Sounds great when used on a podium.

Features:
Classic N/DYM® Sound
Smooth, controlled frequency response
High N/DYM® sensitivity
Superior multistage shock mount and "Warm Grip" handle for unmatched low handling noise
On/Off switch
Sounds great when used on a podium

The Electro-Voice N/D367s is a member of a family of microphones that are manufactured with refinements that enhance the sonic smoothness, improve gain-before-feedback and provide more consistent performance with greater durability than earlier generations of N/DYM® microphones.
The controlled response of the N/D367s allows the user to easily work the microphone for optimal performance. The N/DYM® magnet geometry used in the N/D367s, combined with a reinforced diaphragm design, creates a smooth, extended frequency response with a warm, open and transparent sound quality.
The N/DYM® microphones feature EV's AcoustiDYMTM shock - mount system. This unique vibration isolating system works as a multistage device. At low frequencies, a rear sound wave cancels the diaphragm motion, while, at high frequencies, the specially designed rubber shock mount isolates the transducer from motion. Combining AcoustiDYMTM with the elastomeric Warm-GripTM handle and the windscreen bumper produces an advanced technology, vibration isolating system which dramatically reduces all forms of handling noise for the most demanding situations.
The N/D367s has a cardioid polar pattern, providing an enhanced front-area sensitivity and acoustic rejection directly behind the microphone, reducing feedback under live performance conditions. This is particularly useful with typical monitor speaker placement and high sound pressure (SPL) requirements. Additionally, the N/ D367s's polar patterns are unusually uniform with frequency, ensuring superior gain-before-feedback in live applications and superior isolation when used in the studio.
The N/D367s pop filters unique design utilizes a specially processed AcoustifoamTM filter to minimize wind noise and vocal P-pops. This design makes the pop filter an integral part of the microphone's removable front grille assembly, allowing easy cleaning for continued top performance.

Standard Placement & Use Guidelines
1. Always point the microphone at the desired source of sound, and away from any unwanted sources.
2.The microphone should be located close to the sound source to minimize interference from other potential sound sources.
3. Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the desired sound source.
4. Minimize over-handling of the microphone to reduce unwanted mechanical noise.
5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback.

Product Application

Female Vocal
Jazz
Male Vocal
Rock

Product Specification

Element	Dynamic
Polar Pattern	Supercardioid
Impedance, Low-Z balanced	300 Ohms
Connector Type	3-pin XLR
Open Circuit Voltage	3 mV/Pascal
Audio Frequency Response	25 - 20,000 Hz Near Field 55 - 20,000 Hz Far Field
Mic Type	Handheld
Wired/Wireless	Wired
Finish	Non-reflecting Black
Case Material	Metal
Weight Net	238 g ( 8.4 oz )
Dimensions (Height X Max Diameter)	181 x 52 mm (7.13" x 2.05")