We combined two top-selling products to give you a portable system that can meet your needs no matter where you go. You get the Yamaha EMX212SC 12-channel powered mixer and a pair of Yamaha Club Series V S112 loudspeakers. EMX212SC Powered Mixer
The Yamaha EMX212S is a powered mixer that offers a total of 12 input channels – four for monaural microphone (incl. Phantom Power) or line input, plus four pairs that can function either as monaural microphone inputs or stereo line inputs – providing you with a versatile mix of input capabilities for a wide range of applications. If you need only microphone inputs you can use up to eight mic channels. Or if, for example, you want to play recorded background music during breaks (that’s one stereo channel), and you have a keyboard player with a stereo-output keyboard (that’s one more stereo channel), you still have six mic/line inputs. If you use all four stereo pairs to handle stereo line sources you have four channels available for mono mic or line input. This is a very versatile system that can adapt to your needs.
This mixer doesn't skimp on power. With 200-watts per channel it should be more than sufficient for small-to-medium size venues. It also features a power mode switch that lets you use the two power channels as a stereo amplifier, or you can use one of the channels for the main speaker(s) and the other to drive monitors with a separate monitor mix set up via the channel MONITOR controls.
At only 22 pounds, the EMX212S is an extremely portable powered mixer. It features Yamaha's Feedback Channel Locating System, SPX digital effects, and a built-in graphic EQ. Club Series V S112 Loudspeaker Based on the incredibly popular Club IV Series, the Club V Series continues this success story with larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼” connectors. The S112V is a two-way system featuring a 12” LF driver and a 90° X 60° constant-directivity horn. Club Series V loudspeakers with the S prefix have rugged carpet covering and steel corner protectors to hold up to the rigors of transport. Heavy arced steel grilles offer protection for the woofer. Sturdy steel handles and pole sockets make moving and positioning easy. Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of 0.0001 inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. The 12” woofer has a high strength curvilinear cone along with an oxygen-free copper voice coil and an oversize strontium ferrite magnet to provide high power handling and long life. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2” dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It’s mated to a 90° x 40° custom designed constant-directivity horn with excellent dispersion and response. Crossover network that divides the signal going to the woofer and compression driver is constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components. Connection to the S112V is via dual Neutrik Speakon® ¼” jacks for the highest possible strength and current capacity. Two of each connector makes it easy to daisychain speakers. Built in the U.S., these loudspeakers are designed to provide years of service with high power handling and excellent response.
|