cart Video checkout my account login about us contact us
 
800 562-6006
 
AV Products Systems Integration CD/DVD Media
 
Sound Video Lighting Recording Cables Brands Clearance Rebates & Deals WorshipTools Blog
CCI Solutions > WorshipTools > Microphones > Miking Drums for Recording
WorshipTools
 
Microphones
 
Miking Drums for Recording
 
Connect Me with an Expert
 
Name:
Email:
Your Message:

Miking Drums for Recording

 





  


INTRODUCTION:

Drum Kit on Stage with MicrophonesIn the modern studio there is no more complex job for the engineer than micing the drum set. Musically, the drum set and bass form the rhythmic underpinning of any jazz, pop or rock musical performance. In the final mix, it can be in the background, foreground or well out front, depending on the needs of the music.

The job for the engineer at the tracking stage of album production is to store the necessary sonic elements, both stereo and mono, that will allow the mix engineer to put together a coherent rhythmic sound structure for all possible options that the artist and producer may want to experiment with as the album project approaches completion.

The tracking engineer must have a good knowledge of the drum set and how a drummer goes about setting it up. It’s not all that simple; a drummer may take a good bit of time setting up his instruments and may damp the various drum heads to minimize
ringing. It is rare for a drummer to come into a studio and be up and running in a few minutes. At a rehearsal, possibly -- but not for a recording session. The artistry of an accomplished drummer is truly awesome. The really good ones show a degree of independence of feet and hands rivaling that of a pipe organ virtuoso.

You will find that the drummer is often the first musician to arrive at the studio, often a couple of hours ahead of starting time. This extra time is essential in setting up the drums and making sure that all spurious resonances and extraneous noises
have been worked out of the system.

The drummer should maintain eye contact with the other players and not be shunted off to a distant drum cage or isolation booth. For certain kinds of music the drum set will have to be isolated with goboes, but the drummer should never feel out of contact with the other musicians. There are of course exceptions, and many a drummer has played alone in a big studio, adding his tracks to pre-existing bass and other supporting tracks, often taking advantage of the acoustics of a large empty space.

THE BASIC MAKEUP OF THE DRUM SET:

Although the actual instruments and their arrangement will vary from player to player, the drum set will have the following basic elements:

Kick Drum: The kick drum is played with the right foot using a spring-loaded pedal. There may be heads (the striking surface) on both sides of the kick drum, but some players use a single head. Another variation is the use of a full head on the
playing side, with a head on the opposite side that has a medium sized hole in it, providing a limited degree of tuning of the inner cavity. The larger the drum and lighter the tension on the heads, the lower the pitch will be. Some players go for
a higher pitched, highly damped sound while others prefer a lower pitched sound. In either case the player will most likely want the sound to be fairly well damped so that it will not overhang and possibly interfere with the bass line.

Snare Drum: The snare is played by both hands using a pair of sticks or light metal brushes against the head in a circular motion. The “snares” themselves are actually multiple sets of thick gut or metal strings that rest against the bottom head of the drum, and they give the characteristic “burr” to the sound of the instrument when it is struck. They can be disengaged, in which case the sound of the drum is like that of a high-pitched tom.

Hi-hat cymbals: The hi-hat assembly is made up of a pair of face-to-face cymbals, one on top of the other. A pedal operated with the left foot varies their separation slightly, and the drummer plays them with a stick in his right hand while holding the cymbal pair by their edges lightly with his left hand. The sound is light and very articulate for off-beat rhythmic patterns, since it reflects movements and positions of both hands.

The toms: The toms (officially known as tom-toms) are one-sided drums, slightly deeper in size and pitch than the snare drum, which are placed left to right behind the snare and high-hat and over the kick drum. They are normally tuned low, mid and high, but without definite pitch. As a rule, there are three of them, but some players may add a fourth.

The cymbals: There are usually three cymbals arranged at the upper level of the set and directly above the toms. They have various names: the crash cymbal is large and is used for musical accents; the ride cymbal, usually higher pitched, is used in continuous passages, and a sizzle cymbal, with small metal pins loosely fitted on its periphery, is used for light passages where an increased degree of high frequency “shimmer” is desired. Cymbals are among the most expensive items in a drum set. Many excellent ones are made in near-eastern countries, such as Turkey, where the art has been handed down in families for many generations.

This white paper article deals with the recording aspects of drum miking. You might find this AKG drum mic kit a good solution for your live or recording setup. It includes some of AKG's most popular mics at a great price. AKG Drum Mic Kit in Hard Case with foam interior

This, in short, is a description of a typical modern drum set. Figure 1 shows what it looks like from the viewpoint of the audience.

 

Black and white diagram of a drum set including cymbals, high hat, snare, toms and kick drum

In this White Paper we will discuss micing the drum set largely from the point of view of AKG’s highly regarded studio mics. We also want to introduce a new family of low-cost dynamic microphone models that are so good you’d think they were condensers! These are the models D440, D550 and D660; along with the D770, D880 and D112, they are ideal for the home studio and music reinforcement on stage. They all have high overload margins in the 145 to 150 dB, which is essential in drum micing.

BASIC MIKING STRATEGY:

At the most fundamental level we have a microphone on the kick drum and an overhead (OH) pair of mics picking up the entire set in stereo. Many a jazz recording, mixed direct-to-stereo, has been made with this setup. If you are doing this, we suggest the following options:

Miking the Kick Drum:

There are several important choices to make. Many experienced engineers prefer to use a tried and true dynamic microphone rather than a more recent condenser model. The reason is this: placed close to the head of the kick drum the microphone will pick up sound pressures that are extremely high. The overload characteristics of a dynamic mic can be more forgiving than those of a condenser. Also, since the dynamic goes into distortion more gently, the actual sound of slight nonlinearities might actually be a desirable thing.

Comparitive diagram showing the onset of overload in condensor and dynamic microphones In the old days the AKG D12 dynamic was one of the mainstays of kick drum micing; today, the D112 is the modern version of that microphone. With its carefully engineered bass resonance chamber the D112 can handle any kick drum with ease. If you want to use a condenser with ultrawide low frequency capability, we suggest the C4000B, with its 0.5% THD overload point of 145 dB. Figure 2 shows the difference between a dynamic and a condenser at or near the onset of distortion. The dynamic has more residual distortion than the condenser, but the condenser goes into gross distortion at a point where the dynamic may still be producing only moderate amounts of distortion.

Diagram Detail of kick drum as shown from above Another big decision is where to put the microphone. Since a cardioid microphone is nearly always used, there will be a good bit of low frequency boost due to proximity effect. Suggested mic positions are shown in Figure 3 If the microphone is close to the middle (position 1), you will get a sound that has perhaps too much low end and not enough articulation. As the microphone is moved progressively offcenter, the sound will have more articulation, since you will be picking up less fundamental sound from the head. Stop well short of the edge, keeping a distance of about 4 to 5 inches.
The actual distance of the mic to the head will normally be in the range from 5 to about 2 inches.

Under some conditions, you may find it useful to put up a second kick mic, recording both on separate tracks, of course. A good combination here would be a dynamic on one track and a condenser on the other.

The Overhead Pair

Pick these mics carefully, since they provide the largest part of the sonic stage you are looking for. Studio engineers usually pick the best condenser cardioids they have. For the most natural response we suggest a pair of C391’s or C480’s with their ultralinear high frequency response. If you want a slightly brighter sound, use a pair of AKG large diaphragm condensers set in their cardioid position. Another good choice is the C1000S. Its included presence booster creates a frequency rise in the 5 to 9 kHz range that guarantees you’ll get a sound that will cut gently through a complex mix, even when the drummer is playing softly. For the home studio or on-stage the D440, D550 and D660 are excellent alternatives, with their broad high frequency boost in the 8 kHz range.

The best position for the OH pair is often found about 6 to 8 inches over the player’s head. The mics should always be cardioids or hypercardioids in order to hold down studio leakage, and should be pointed outward from each other and down toward the hi-hat on the left side and the large tom on the right side.

The spacing between the OH pair is fairly critical. If they are close (within one foot), the sound stage you get will be tight with good delineation but with limited stereo spread. As you move the mics from 1 to 2 to 3 (keeping their target aiming directions on the hi-hat and big tom), the sound will “open up” and will seem wider on the reproduced
stereo stage. Details here are shown in

Diagram showing suggested overhead mic postitioning.

By the way, good drummers often know more about drum miking than many engineers think they do -- at least they know what has worked well for them in the past. Listen to them; they may be able to save you a lot of time.

Recording:

So far we’ve only used four microphones (counting 2 on the kick drum), and if you are in a tracking session, each one should go to its own track dry and unprocessed for later mix-down. Alternatively, if you are doing a direct-to-stereo recording, keep in mind that any processing you do cannot be undone easily.

it to be. An overall view of the drum set with the four microphones is shown in Figure 5.

Diagram Detail of an overhead stereo pair suspended or on a stand 6-6.5 feet over the cymbals and condenser & dynamis mics on floor next to kick drum

 

If you’re going straight to stereo you will also have to make some processing decisions for the drum tracks. Avoid any reverberation; you probably won’t need it since there is enough overhand in the basic sound itself. A final point regarding recording levels: Mics that are close-in on a drum set will usually be sampling very high level sound fields. With most of the newer microphones you won’t have to use the internal microphone pad, but you should carefully trim down the console mic input sections, just to make sure that you still have sufficient headroom at all times.

A More Complex Pickup:

Another common technique is to focus the pickup by micing both the hi-hat and snare drum individually. The additional microphones are often added to provide more sonic choices during mixdown.

 

Diagram of positioning for microphone on a high hat cymbal
Miking the Hi-hat:

Figure 6 shows a view of the hi-hat set. Note that the two cymbals have room to pivot slightly about their suspension points, as indicated by the curved lines, and the mic must be outside this range. Avoid placing the mic along the edge of the cymbals in their rest position, since this may produce some strange sounding cancellations. The microphone should be placed above the hi-hat set as shown, and it should always be located on the side away from the drummer. We recommend a small format condenser cardioid because of its ability to pick up fast transient responses in the high frequency range. The C1000S, C391B or C480 B-CK61 will work nicely. Any of the Blue Line cardioids will work nicely, as will the new C430 or C451 B. The D550 or D660 can also be used on the hi-hat.

Diagram of mic set up  to mic a snare drum

Miking the Snare Drum:

Figure 7 shows a small instrument microphone attached to the rim of the drum. This microphone is small enough that it goes virtually unnoticed by the drummer, and yet picks up the sound of the drum accurately. The AKG MicroMic model C418 is ideal for this application. The C418 is a very small condenser model with a 1% overload point at 131 dB, more than enough for the job. Its sensitivity is 4 mV/Pa, so it will need little further padding to prevent overloading the console’s input section. Its low frequency response has been gently rolled off in the far-field so that close-in pickup will be natural through the boosting of bass frequencies caused by close micing (proximity effect). There is also a broad high frequency boost in the 10 to 15 kHz range for added presence in complex musical passages. The C418 was designed specifically for percussion instrument micing. However, some condensers may not be able to handle the high sound pressures produced by drums. For this reason, dynamic microphones such as the D440, D660 or D770 are often used. A second microphone on the bottom head will add a new dimension to your snare sounds. But, remember that you must reverse the phase of the bottom
mic because the bottom head travels outward as the top head is driven inward.

As with all other mics used with the drum set, mount it on the far side, away from the drummer, and make absolutely sure that it is in a position so that there is never a chance
that the drummer will accidentally strike it while playing.

 

Putting it on Tape:

Our microphone count is now up to six, so if you are tracking, lay down one mic per tape track, again, without processing. In your monitor mix, or if you are making a direct-to-stereo recording, carefully pan the two new elements into the stereo soundstage at positions that match their actual positions in the drum set as seen from the front.

Going for Broke -- Miking the Whole Set:

Occasionally you will come across a job where the producer and drummer want everything to be miced. This is fairly commonplace in high-level music reinforcement, where musical details can get lost in large performance venues. In recording, it doesn’t happen that often, but may be needed for an extended solo passage where drums will be added later.

The normal procedure here is to lay down a so-called “scratch track,” which is played by the drummer and is used for sync purposes later. It will not appear in the final mix. Then, either on spare tracks or on another tape machine running in sync, the drummer will play alone in the studio with a suitable monitor mix on phones. The studio will normally be bare, and additional spot mics will be placed on the cymbals (three mics) and on the toms (three mics). Mic the toms as you did the snare.

The studio will normally be adjusted to be somewhat more live than usual, and additional mics (perhaps four more) will be used to pick up room sound. These “house” mics can be dynamics or condensers. Finally, another OH stereo pair will be placed another 2 feet or so above the basic OH pair.

With the drum set we have been using here, this will bring the total mic (and track) count up to 18:
1. Primary OH pair: 2
2. Secondary OH pair: 2
3. Cymbals: 3
4. Toms: 3
5. Hi-hat: 1
6. Snare: 1
7. Kick drum: 2
8. Room mics: 4

Note that there are four stereo pair here: two OH pairs and two house pairs. The definition of a stereo pair is this: if you pull up only a stereo pair, panning it left and right, you will hear a continuum of sound along the stereo stage from left to right. These are vital ingredients and cannot be concocted later on from any of the mono tracks you have laid down. They will come in very handy later on in the mixing process.


The setup, as we have described it, is shown in Figure 8A and B. Do we have to stop here? Obviously not; we can add as many mics as we have remaining tracks. Another useful one to add would be a cardioid looking down on the head of the snare at a distance of about 8 to 10 inches -- but far enough back so as not to bother the drummer.

Diagram showing best positions for microphones when you want to mic each drum separately

Can We Subgroup to Save Tape Tracks?
Yes, if you proceed very carefully and think out the whole process. Remember, stereo pairs of channels are the best way to subgroup. For example, if you anticipate a shortage of tape tracks, you could sub-mix the three mics on cymbals, thus picking up an extra track. The same could be done on the three toms, again picking up a track.

In doing this, you might think of the cymbal stereo pair and tom stereo pair as “layers” that you can later add to the basic mix. But before you commit to this, make sure that the drummer and producer hear exactly what you intend to do, and that they agree!

Diagram of positioning for global micing of a drum set in a live studio setting

Article by permission AKG Acoustics www.akg.com
  


 














When you call CCI Solutions, you'll receive helpful guidance from a friendly AV expert - Call us today! >>800.562.6006
Customer Support
Additional Features
Connect with us
Contact us
800.562.6006
360.943.5378
Fax 360.754.1566
1247 85th Avenue SE
Olympia, WA 98501
Hours M-F 8-5 PST
Get our FREE AV Gear Catalog!
Packed with hot new products and
tons of unbeatable deals!
Get our FREE Worship Tools email!
Helpful Tips, Tricks, How-To's, Product
Reviews and Special Offers!
® 2014 CCI Solutions All Rights Reserved Secured by