[Video Transcript] A lot of you have the PreSonus StudioLive 24.4.2 digital mixing console and it's a great mixing console. A lot of you are also taking it out on the road or using it for portable church and need a great case. Gator makes a great case. Let's take a look at it now. The case is designed to securely fit the StudioLive within a nice inch and a half piece of foam here very high density foam. And, you can run this, the mixer while it's still in the case. One of the great features about this case is what it's called a "dog house." Usually only big touring mixers have cases with dog houses...continue reading
So let's take a look at this. What the dog house is for, you can see it has holes on the side here. so you can take a snake cable, bring it in, and you can connect it to the inputs on the mixer. You simply flip that latch, flip that latch open it up, the dog house folds down for complete and easy access to all the connectors inside. So your mic connectors, your line-level connectors, your inputs, your outputs everything, all the cable, lays right in the dog house here. Then you bring the inputs and outputs out through the slots, take the dog house, flip it back over, flip the latches down, and it's a nice clean installation. When you're ready to go, open it up and disconnect them. So the dog house is fantas...a fantastic way to use the mixer within the case. But a good case isn't any good unless it's a good case. So take a look at the outside of the case.
This is the same case that's already enclosed. You can see it's got padded handles here. Nice, heavy duty, both vertical and horizontal. Heavy duty latches. Heavy duty riveted construction. You've got ball corners. This is a plywood case. Good-fitting case, and You've got latching rollers. If you look right down there, These rollers will latch just like that to keep it from moving or you just simply pop 'em up and swing 'em around. So good rollers, good latches. Now let's take a look at it, what happens when you're ready to go? You've disconnected all the cables, and you want to get going. So I'm going to have David from Gator Cases help me out here. We just go ahead and take this, pop it right on the top, do it set, take each of the latches down, there's 2 latches on each side, one in the back, then we'll take the faceplate, pull that up like that, put the top latch on, put the bottom latch on, and we've got handles right here, we're ready to go. Reverse when you go ahead and set up. Just take that off, open the dog house and away you go. So from Gator Cases, a great case for your StudioLive 24.4.2 digital mixer