Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

Showing 1 - 20 of 36 Products

ClearSonic CLE-A2466X1

ClearSonic CLE-A2466X1 A5 1-Section Acrylic Panel Drum Shield

ClearSonic Clear 1/4" thick acrylic, 'accordion folding' for easy storage / setup, full-length hinges for increased stability

    The ClearSonic A5-1 section acrylic panels are made from 1/4" thick acrylic and help reduce drum bleed into microphones (vocal and instrument) for a better sound experience. The A5 is designed for a five-piece drum set. The one-panel configuration has accordion-style folding for easy storage, setup, and dismantling. In order to ease wiring, cable cut-outs are located between each panel.

Read more
$115.50

List Price $165.00

Save 30% with CCI Solutions

ClearSonic CLE-A2466X2

ClearSonic CLE-A2466X2 A5 2-Section Acrylic Panel

ClearSonic Full-length hinges, 'accordion style' hinges, clear 1/4" thick acrylic

The ClearSonic A5 2-Section Acrylic Panel 48" wide x 66", 2-section Add-On w/Hinge (old A5-2), is made from 1/4" thick acrylic and helps reduce drum bleed into microphones (vocal and instrument) for a better sound experience. 66" high A2466 CSP are great for isolating drums, cymbals and other instruments mounted higher than 48". The A2466x2 is commonly used as an 'add-on' to increase the width of an existing A2466 system by 48 inches or as a smaller stand-alone system. 12" and 18" AX Height Extenders are available if more height is desired. Designed for use with a five-piece drum set.

Read more
$231.00

List Price $330.00

Save 30% with CCI Solutions

ClearSonic CLE-A2466X4

ClearSonic CLE-A2466X4 A5 4-Section Acrylic Panel Drum Shield

ClearSonic Four 5.5' x 2' hinged clear sections, full-length hinges, 'accordion folding' for easy set-up / dismantle, clear 1/4" thick acrylic

    An ideal method of controlling acoustic drum volume in a live performance. The ClearSonic A5-4 is a set of four 5.5'H x 2'W hinged panels that reduce drum bleed into vocal or instrument mics and lower stage volume so musicians can hear themselves better. It also lowers the projected volume of drums into the audience so sound techs can better control the room mix. A unique full-length transparent hinge connects each panel and allows the system to fold accordion-style for easy transport and storage. There are no gaps between panels for sound to escape except at the very bottom to allow for cable passage.

    ClearSonic panels are made from a high quality, 1/4" clear acrylic and provide acoustic separation between onstage instruments and the audience.

Read more
$462.00

List Price $660.00

Save 30% with CCI Solutions

ClearSonic CLE-A2466X5

ClearSonic CLE-A2466X5 5-Section Acrylic Drum Shield

ClearSonic Five 5.5' x 2' hinged clear sections, clear 1/4" thick acrylic, reduced drum bleed, easy storage

    An ideal method of controlling acoustic drum volume in a live performance. The ClearSonic A5-5 is a set of five 5.5' tall by 2' wide hinged panels that reduce drum bleed into vocal or instrument mics and lower stage volume so musicians can hear themselves better. It also lowers the projected volume of drums into the audience so sound techs can better control the room mix. A unique full-length transparent hinge connects each panel and allows the system to fold accordion-style for easy transport and storage. There are no gaps between panels for sound to escape except at the very bottom to allow for cable passage.

    ClearSonic panels are made from a high quality, 1/4" clear acrylic and provide acoustic separation between onstage instruments and the audience.

Read more
$577.50

List Price $825.00

Save 30% with CCI Solutions

ClearSonic CLE-A2466X6

ClearSonic CLE-A2466X6 A5 6-Section Acrylic Panel Drum Shield

ClearSonic Six 5.5' x 2' hinged clear sections, full-length hinges, 'accordion style' folding, clear 1/4" thick acrylic

    Clear-Sonic's A5 6-Section Acrylic Panel is designed for a five-piece drum set. With a height of 66" x 144" wide, the A2466 CSP are great for isolating drums, cymbals and other instruments mounted higher than 48". The A2466x6 is one of ClearSonic's best-selling systems and will provide about 180° of coverage around a 5-piece drum kit. 12" and 18" AX Height Extenders are available if more height is desired. Full-length hinges increase stability, and 'accordion style' folding makes for easy set-up and storage.

Read more
$693.00

List Price $990.00

Save 30% with CCI Solutions

ClearSonic CLE-A2466X7

ClearSonic CLE-A2466X7 A5 7-Section Acrylic Panel Drum Shield

ClearSonic Seven 5.5' x 2' hinged clear sections, full-length hinges for increased stability, cable cutouts, lowers stage volume and reduces drum bleeding

    The ClearSonic's A5-7 is a set of seven 5.5'H x 2'W hinged panels that help reduce drum bleed into vocal or instrument mics and lower stage volume so that musicians can hear themselves better. It also lowers the projected volume of drums into the audience so sound techs can better control the mix in a room. 66-inch high A2466 CSP are great for isolating drums, cymbals and other instruments mounted higher than 48 inches. The A2466x7 is ClearSonic's largest pre-assembled system and will provide about 200° of coverage around a Five-piece drum kit. 12" and 18" AX Height Extenders are available if more height is desired. Full-length hinges increase stability and accordion-style folding makes for easy set-up / dismantle.

Read more
$808.50

List Price $1,155.00

Save 30% with CCI Solutions

ClearSonic CLE-A2448X7

ClearSonic CLE-A2448X7 A4 7-Section Acrylic Panel

ClearSonic Full-length hinges, 'accordion style' folding, clear 1/4" thick acrylic

    The ClearSonic A4 7-Section Acrylic Panels are made from 1/4" thick acrylic and help reduce drum bleed into microphones (vocal and instrument) for a better sound experience. 48" high A2448 CSP are commonly used on drum kits that have lower cymbals or when communication between musicians out-weighs higher coverage. The A2466x7 will provide about 200° of coverage around a five-piece drum kit. Full-length hinges for increased stability, and accordion-style folding for easy set-up and storage. Cable cut-outs provide simple wiring. Dimentions: 168" wide x 48" high, 7-section CSP (old A4-7)

Read more
$597.80

List Price $854.00

Save 30% with CCI Solutions

ClearSonic CLE-IPD

ClearSonic CLE-IPD IsoPac D DK Grey Drum Shield

ClearSOnic Portable with easy set-up / dismantle, majority of components fold away for compact storage, 4' high clear acrylic panel system

    The IsoPac D Drum Kit System by ClearSonic features a 4-feet tall A2448x5 CSP with (5) S2224 SORBER baffles attached to the inside lower portion of the acrylic. (2) S2444x2 baffles wrap around the rear.

    ClearSonic Panels assist in acoustic separation between instruments on stage or in the studio, helping reduce drum bleed into vocal or instrument microphones. In a concert stage situation, CSP allows for a lower stage volume so that the performers can hear themselves playing better. This set-up is best suited for the studio environment, but can also be used in certain live applications. Dimensions: 6-feet wide x 6-feet deep x 4-feet tall

Read more
$890.61

List Price $1,272.30

Save 30% with CCI Solutions

ClearSonic CLE-IPC

ClearSonic CLE-IPC IsoPac C DK Grey Drum Shield

ClearSonic Isolation and absorption, portable and easy to setup / dismantle, easy to get out of

    IsoPac C by ClearSonic features an A2466x5 CSP and (5) S2224 SORBER baffles in the front and (3) S2466x2 SORBER baffles around the rear. The IsoPac C is likely more suited to a studio environment, more specifically as a drum isolation booth, but could also be used in certain live situations. The IsoPac C will be more effective in a room with low ceilings and acoustic treatment than it would be in a room that is large and has a lot of hard surfaces. Regardless, the IsoPac C will reduce stage volume, allowing everyone to play at a more moderate sound level. Like all of ClearSonic's booths, the IsoPac C is modular and can be upgraded to an IsoPac A or B in the future if desired. Dimensions: 6-feet wide x 7-feet deep x 5.5-feet.

Read more
$1,307.95

List Price $1,868.50

Save 30% with CCI Solutions

ClearSonic CLE-IPB

ClearSonic CLE-IPB IsoPac B Drum Shield Dark Gray

ClearSonicDrum Shield Portable, easy set-up / dismantle, no gaps for sound leakage

    ClearSonic's IsoPac B Drum Shield (Dark Gray) is similar to IsoPac A in sound reduction, but is slightly smaller, and allows for more of the drum kit to be seen. There is an A2466x6 CSP with AX2412x6 Height Extenders in the front, and (3) S2466x2 SORBER baffles in the rear. The booth measures 6' wide x 7' deep x 6.5' tall for 50-60% perceived volume reduction and a foot of open foot space. There is a 6-inch clip-on fan to help with air exchange. The IsoPac B is best suited for the studio environment, but can be used in certain live situations as well. All Sorber products have a Class-A fire rating.

Read more
$1,869.42

List Price $2,670.60

Save 30% with CCI Solutions

ClearSonic CLE-IPA

ClearSonic CLE-IPA IsoPac A Drum Shield Dark Gray

ClearSonic 7' wide x 9' deep x 6.5' tall, easy to get out of, easy to set-up / dismantle

    The ClearSonic IsoPac A Drum Shield (Dark Gray) includes an A2466x7 CSP and AX2412x7 Height Extenders in the front, and three S2466x2 Sorber baffles in the rear. (7) S2224 Sorber baffles are attached to the inside lower portion of the acrylic panels. The clear panels are a total of 6.5ft. tall, and the S2466x2 baffles are 5.5ft. tall, so there is a foot of open space around the rear of the booth allowing for air exchange. The ST1266 12-inch wide SORBER Lid baffle is added to the standard 3-section lid to provide a 7-feet wide by 5.5-foot deep lid system. IsoPac A includes (2) lid support bars for maximum support and stability and a six-inch clip-on fan to help with air exchange. The IsoPac A is also easy to get in and out of, due to the Sorber panels not actually connecting to the ClearSonic Panels. One can easily use an outside section of a Sorber system as a "door."

    7ft. wide x 9ft. deep x 6.5ft. tall IsoPac A - 50-60% perceived volume reduction.

    If reflections off the front shields during recordings are a problem, a few more S2224 SORBER baffles can be purchased and velcroed to the offending shields. Attach them at the same height as the mics for maximum effectiveness.

Read more
$2,227.40

List Price $3,182.00

Save 30% with CCI Solutions

ClearSonic CLE-MMP

ClearSonic CLE-MMP MiniMega DK Grey Drum Shield Package

ClearSonic 360° of ClearSonic panels, lid system pieces, fan, Sorbers, and support bar

    The ClearSonic MiniMega Drum Shield Package (Dark Gray) is a slightly smaller version of the MegaPac isolation booth. Featured is 360° of ClearSonic Panels for maximum sound isolation. ClearSonic shields in the back means less opening for sound to escape. There is an A5-6 in front, and an A5-5 in the rear. The two panel systems do not actually connect to each other, so the end panel of the A5-5 can be moved and used as a door.

    By adding the STC512 12' wide Sorber Lid baffle to the standard 3-section lid, total lid coverage is 7'W x 5.5'D. The ClearSonic MiniMega includes two lid support bars for utmost stability.

    Parts Included:

  • (1) A5-6 - 6-section CSP
  • (1) A5-5 - 5-section CSP
  • (1) AX12-6 - 6-section 12" height extenders
  • (1) AX12-5 - 5-section 12" height extenders
  • (1) STC5L - 2'W x 5.5'D center lid section
  • (1) STC512L - 12"W x 5.5'D center lid section
  • (2) STS5L - 2'W x 5.5'D side lid section
  • (2) BAR - standard support bar
  • (25) S2L - 22"W x 2'H SORBER baffle (provides maximum acoustic performance inside and out)
  • (1) Fan - 6", 2-speed, low noise fan
Read more
$2,951.20

List Price $4,216.00

Save 30% with CCI Solutions

ClearSonic CLE-MP

ClearSonic CLE-MP MegaPac DK Grey Drum Shield Package

ClearSonic 360° of ClearSonic panels, lid system pieces, fan, Sorbers, and support bar

    The ClearSonic MegaPac Drum Shield Package is ideal in applications where maximum sound isolation is needed. The MegaPac features 360° of ClearSonic Panels for utmost noise cancellation. ClearSonic shields in the back cause less opening for sound to escape. A full seven feet of interior headroom is achieved by using the AX18 Height Extenders. There is an A5-7 in front, and an A5-5 in the rear. The two panel systems do not actually connect to each other, so the end panel of the A5-5 can be moved and used as a door.

    By adding the STC512 twelve inch wide SORBER Lid baffle to the standard 3-section lid, total lid coverage is 7’W x 5.5’D. The ClearSonic MegaPac includes two lid support bars for maximum stability. (19) S2 and (12) S1 SORBER baffles provide a whopping 112 Sq. Ft. of interior sound absorption for maximum acoustic performance inside and out.

    Parts Included:

  • (1) A5-7 - 7-section CSP (front)
  • (1) A5-5 - 5-section CSP (rear)
  • (1) AX18-7 - 7-section 18" height extenders (front)
  • (1) AX18-5 - 5-section 18" height extenders (rear)
  • (1) STC5L - 2'W x 5.5'D center lid section
  • (1) STC512L - 12"W x 5.5'D center lid section
  • (2) STS5L - 2'W x 5.5'D side lid section
  • (2) BAR - standard support bar
  • (19) S2L - 22"W x 2'H SORBER baffle
  • (12) S1L - 22"W x 2'H SORBER baffle
  • (1) Fan - 6", 2-speed, low noise fan
Read more
$3,351.18

List Price $4,787.40

Save 30% with CCI Solutions

ClearSonic CLE-AX2412X1

ClearSonic CLE-AX2412X1 AX12 Drum Shield Height Extender

ClearSonic 'H' channel and hinge are included, folds 'accordion style' for easy storage, 24" x 12"

    ClearSonic now offers a 12" Drum Shield Height Extender for its popular drum shield panels. The AX12 is perfect for those who need panels to stand 78” or higher. Each extender comes with “H” channel and hinge, and easily snaps to the top of existing panel sections. Complete and correctly assembled systems will still fold “accordion style” even with the addition of height extenders. The AX12 is a single drum shield extension section, so you can purchase just the right amount for your sound shield system.

Read more
$28.70

List Price $41.00

Save 30% with CCI Solutions

ClearSonic CLE-S1266

ClearSonic CLE-S1266 STC512 DG Sorber IsoPac Lid Extension Panel Dark Gray

ClearSonic Lid Panel 1' x 5.5' x 1.5', Class-A fire rating, constructed with fiber glass, covered in heavy-duty cloth

    The ClearSonic STC512 (Dark Gray) is a 12' x 5.5' sound-absorbing panel and is commonly used as part of a large format lid system. STC512 can be used in conjunction with angled STS5-D side panels, the 24"-wide STC5 center section and telescoping aluminum support bars (CLE-BAR) to build the lid to fit your drum shield system. A lid system such as this will substantially reduce sound escaping upwards out of the drum shield enclosure. Side panels and support bars are sold separately. The panel is covered with a dark gray fabric and can be secured together with other panels using standard hook-and-loop strips.

    The complete lid system as well as a light gray version is also available.

    Features

  • Constructed from absorptive fiberglass encased in heavy-duty cloth
  • Reduces reflections
  • Works well with Velcro
  • Works with ClearSonic panels
  • 5.5' H x 1' W x 1.5" D
Read more
$76.23

List Price $108.90

Save 30% with CCI Solutions

ClearSonic CLE-AX2418X1

ClearSonic CLE-AX2418X1 AX18 Drum Shield Height Extender

Clear Sonic Hight Extender 'H' channel and hinge are included, folds 'accordion style' for easy storage, 18" x 24"

    ClearSonic now offers a 18" Drum Shield Height Extender for it's popular drum shield panels. The AX18 is perfect for those who need panels to stand 84” or higher. Each extender comes with “H” channel and hinge, and easily snaps to the top of existing panel sections. Complete and correctly assembled systems will still fold accordion-style even with the addition of height extenders. The AX12 is a single drum shield extension section, so you can purchase just the right amount for your Sound Shield system.

Read more
$42.00

List Price $60.00

Save 30% with CCI Solutions

ClearSonic CLE-S1248

ClearSonic CLE-S1248 S1248 Sorber Center Lid Section Dark Gray

ClearSonic Lid Panel 12" x 48" x 1.5", Reduces reflections, extends the width of your lid system

    The Clearsonic S1248 (Dark Grey) is a 12” x 48” sound-absorbing panel. This single section is one of the various lid panels that can be used to make up a Clearsonic Lid System. STC412 can be used in conjunction with angled STS4 side panels, the 24"-wide STC4 center section and telescoping aluminum support bars (CLE-BAR) to build the lid to fit your drum shield system. A lid system like this will substantially reduce sound escaping upwards out of the drum shield enclosure. Side panels and support bars are sold separately. Complete lid systems are also available.

    Features

  • Constructed from absorptive fiberglass encased in heavy-duty cloth
  • Extends the width of your lid system
  • Works with ClearSonic panels
  • 48" H x 12" W x 1.5" D
Read more
$72.80

List Price $104.00

Save 30% with CCI Solutions

ClearSonic CLE-S2224

ClearSonic CLE-S2224 S2 Sorber Baffle (Dark Gray)

ClearSonic 22" x 24" x 1.5", four adhesive-backed Velcro straps, designed for attachment to a CSP

    The Drum Shield S2 SORBER (Dark Gray) by ClearSonic is a 22-inch by 24-inch by 1.5" section of encased fiberglass that can be used on the lower half of the CSP to cut reflections, or used as wall treatment for studios, basements, church sanctuaries, and more. S2 units can be applied to the ClearSonic Panels using 4 included velcro patches. All SORBER products have a Class A fire rating. CLE-S2 are sold in individual sections so you can buy just the right amount for your sound shield needs.

Read more
$38.15

List Price $54.50

Save 30% with CCI Solutions

ClearSonic CLE-S2233

ClearSonic CLE-S2233 S3D DK Sorber S3 Baffle

Clear Sonic Baffel 33" x 22", reduces reflected sound, easy attachment

    The ClearSonic 33" x 22" Sorber S3 Baffle (Dark Gray) is designed to reduce the amount of reflected sound. It can be attached to the inside of ClearSonic panels or to any wall to reduce reflected sound and improve acoustics. The baffle's 22" width enables it to easily fit A3, A4, and A5 panel systems. The material works well with touch fasteners. The baffles can be attached to most flat surfaces.

Read more
$59.29

List Price $84.70

Save 30% with CCI Solutions

ClearSonic CLE-S2448

ClearSonic CLE-S2448 STC4 Center Lid Section (Only) Dark Gray

ClearSonic Lid Section 24" x 48" size, constructed from fiberglass, works well with Velcro

    The Clearsonic STC4 (Dark Gray) is a 24” x 48” sound-absorbing center panel that is part of a Lid System for ClearSonic IsoPack drum shields. Used in conjunction with angled STS4 side panels and telescoping aluminum support bars (CLE-BAR), the STC4 center panel helps create a roof or lid designed to substantially reduce sound that would normally escape upwards.

    The panel is covered with a dark gray fabric and can be secured together with other panels using standard hook-and-loop strips. Side panels and support bars are sold separately. Complete lid systems are also available.

    Features

  • Constructed from absorptive fiberglass encased in heavy-duty cloth
  • Reduces reflections
  • Works well with Velcro
  • Works with ClearSonic panels
Read more
$83.02

List Price $118.60

Save 30% with CCI Solutions