Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

Lowell

Showing 1 - 20 of 29 Products

Lowell SP-2

Lowell SP-2 Steel Panel

2RU Steel Panel for 19" EIA Racks

Lowell SP-2 Features:

  • 2RU blank steel rack panel for 19" EIA racks
  • 16 gauge steel
  • Style: flanged (0.625")
  • Available in single, 6-pack, or 12-pack cartons
  • Finish: black wrinkle powder epoxy

The Lowell SP Series of blank rack panels for 19" wide EIA racks are made with 16-gauge certified US steel and have a 0.625" flange for strength and rigidity. Two of these panels are mounted to the front of Lowell floor racks to provide extra support during shipping. They can then be removed and placed in the top of the rack to close the top opening. SP Series panels have a durable, black wrinkle powder epoxy finish. Available as single units or multi-pack cartons.

Read more
$19.99

List Price $21.52

Save 7% with CCI Solutions

Lowell 25LVC

Lowell 25LVC 25W Volume Attenuator

25W volume attenuator, 10-step, single box, stainless steel cover

Lowell's LVC Series installer-friendly volume controls provide high quality level adjustment of single or multiple speaker lines.

The 25LVC (25W) is a single gang unit that mounts in a minimum depth of 2.125". Finish is brushed stainless steel with a black knob. It has phoenix-style removable screw termination strips for pre-wire with capacity for 14-gauge wire. This model offers up to 33dB attenuation in 3db/steps.

Read more
$23.49

List Price $33.58

Save 30% with CCI Solutions

Lowell SP-4

Lowell SP-4 Steel Panel

4U Steel Blank Rack Panel

The SP-series of blank rack panels are made with 16-gauge US steel and have a 0.625" flange for strength and rigidity. Panels are finished in durable, black wrinkle powder epoxy paint. Available in single units or bulk-pack contractor cartons (6 or 12 panels).

Read more
$17.99

List Price $29.48

Save 39% with CCI Solutions

Lowell US-114

Lowell US-114 Utility Shelf

1 RU (14"D) Utility Shelf

The US-series of steel utility shelves are solid, general-purpose shelves that mount to 19"W racks. They provide sturdy support for non-rackmount equipment such as consumer electronics, power supplies and chassis-style components of all kinds. Shelves are precision-formed from a single piece of 16-gauge, US steel, and include a front and rear flange (.438"H) for added strength and to help keep equipment in place. Smooth black powder epoxy finish.

Features:
• Rugged 16-gauge, US steel construction.
• Supports up to 50 lbs.
• Available in two depths: 10"D or 14"D
• Available in four heights: 1-4RU
• Smooth black powder epoxy finish.
• Made in the USA

Specifications:
• Rack Units: 1
• Panel Space: 1.75"
• Depth: 14"
• Usable Width: 17.562"
• Load Rating: 50 lbs.
Read more
$39.99

List Price $68.30

Save 41% with CCI Solutions

Lowell R1810-72

Lowell R1810-72 Ceiling Speaker

15W 70V Ceiling Speaker Assembly

The R1810-72 15W speaker assembly is an excellent choice for quality general purpose paging and distributed music applications where economy and installed costs are prime considerations. This 15W assembly is comprised of a factory assembled 8" dual cone driver (Model 810) with a wired 25/70V transformer (TLM72) and a white screw-mount round grille (WB-8).

Lowell speaker / transformer assemblies are manufactured to assure consistent performance with clear intelligibility and wide dispersion. The dual cone Model 810 driver has a power rating of 15 watts RMS and employs a 10 oz. ceramic magnet. The cone is molded of a high fibre content material to provide a smooth, extended frequency response and a clean, natural sound. This ceiling speaker is designed to facilitate a variety of distributed applications.

Features:
• Assembly includes a 15W dual cone 8" speaker with a wired 25/70V transformer and a white steel grille with 4 screws.
Read more
$34.99

List Price $46.22

Save 24% with CCI Solutions

Lowell 8XD4

Lowell 8XD4 Speaker Backbox

Painted steel speaker backbox for 8" speakers

Lowell's cone-shaped 8XD4 Series backboxes are engineered to accommodate an 8" speaker in either new or existing construction. The slightly tapered, conical shape allows these backboxes to be stacked for space efficient storage and transit.

These boxes work with a wide selection of Lowell grilles and mounting accessories. Series 8XD4 backboxes are seamless 22-gauge drawn steel construction with undercoating to eliminate acoustical and mechanical resonances. Additionally, 8XD4 Series features a fire retardant polyurethane foam disc affixed to the bottom inside surface to provide supplemental resonance and vibration control.

Models are furnished with factory installed 8-32 screw retaining clips for grille mounting and finished in Lowell's durable white powder epoxy paint.

Read more
$13.99

List Price $15.90

Save 12% with CCI Solutions

No Image Available

Lowell SS24 24 In. Center Mounting Rails

Channel Rail Series SS may be used instead of a tile bridge to provide support for speaker assemblies in suspended ceiling construction. Channels are galvanized steel and will mount recessed ceiling style enclosures – often used for square backbox styles. 23.75” L .
Read more
$6.99

List Price $8.64

Save 19% with CCI Solutions

No Image Available

Lowell 25LVC-DW Wall Plate Attenuator

Wall plate attenuator, 3dB step, single-gang Decora-style 2-piece plate, 2.125" depth

Lowell’s LVC Series volume controls are ETL Listed, compact easy-to-install controls that provide precise level adjustment of single or multiple speaker lines. Choose 25W, 50W or 100W models with standard, Decora-style, or adhesive rackmount plate. All models (including 100W versions) mount within a single gang E.O. Box with a minimum depth requirement of 2.125". Standard, one-piece plates are offered in brushed stainless steel or plastic (white or ivory) versions. Decora-style two piece plates are available in plastic (white, ivory or black) or with a stainless steel coverplate and a white or black plastic subplate. Rackmount models feature an adhesive dial scale with clear label area instead of a plate. All LVC Series volume controls have easy to connect, phoenix-style plug-in screw termination strips for pre-wire convenience with wire capacity up to 14gauge. Attenuation is 3dB per step or 1.5dB per step as noted.
Read more
$24.99

List Price $35.68

Save 30% with CCI Solutions

Lowell 100LVC-RM

Lowell 100LVC-RM 

Volume Control Rack Mount 100w

The LVC series volume controls are UL listed, compact easy-to-install controls that provide precise level adjustment of single or multiple speaker lines. All models mount within a single gang E.O. box with minimum depth requirement of 2.125"

Lowell 100LVC-RM Features:
  • Power Rating: 100W
  • Type: Auto-trans
  • Switch Type: Rotary
  • Switch Positions: 10-of
  • Attenuation Step/Total: 3dB/33dB
  • 1-Gang Plage: Standard Stainless Steel
  • Rackmountable
Read more
$28.99

List Price $40.52

Save 28% with CCI Solutions

Lowell LBS8-R1

Lowell LBS8-R1 Speaker Tile Bridge

Speaker tile bridge for 8" speakers, 23.75" L x 16.5" W

Lowell tile bridge model LBS8-R1 is engineered to distribute the speaker assembly weight to the ceiling support system in a suspended 2' x 2' or 2' x 4' tile ceiling system. Tile bridges are often required, for safety reasons, by local building codes, and for aesthetics to reduce the potential of unsightly ceiling tile sag.

Lowell's tile bridge model LBS8-R1 may be used with or without a backbox, depending on local building codes and the speaker-grille combination being installed (torsion grilles require a backbox). Most installations, however, do utilize a backbox so Lowell incorporated a time saving backbox mounting feature.

The unique Twist'n'Lock™ feature provides hardware-free backbox mounting to speed system installation and reduce labor cost. The Twist'n'Lock™ feature includes four (4) formed tabs that align with four punched cut-outs in the lip of designated Lowell backboxes. To install, simply place the backbox on to the tile bridge, align cutouts with the tabs, push down and twist to lock in position; no screws or fastening hardware required.

Model LBS8-R1 is galvanized 22-gauge steel size 23.75"L x 15.5"W with multiple forms for strength, a round center opening size 8.5" dia., and wire-tie holes at each corner for seismic anchoring where required by code.

Read more
$10.99

List Price $13.16

Save 16% with CCI Solutions

Lowell SL810-72-K

Lowell SL810-72-K Wall Mount Speaker

8" 15-watt wall mount speaker, dual cone in wood finish housing with volume control

This attractive speaker assembly is ideal for surface-mount applications where the aesthetics of a wood finish housing with black cloth grille are preferred characteristics for the paging and music speakers.

Each assembly includes dual cone 8” 10 oz. driver Model 810 with a factory wired dual voltage transformer mounted within a slope-front housing. The housing measures 10.551”H x 9.469”W with a front-to-rear depth of 5.5” at the top and 3.625” at the bottom. The housing is particle board construction with an attractive walnut laminate and black fabric grille. The assembly includes a rear mounted hanger bracket with easy-install keyhole mount located on the center top edge of the housing. The housing has an open back and features a .354” diameter opening with a black gasket, bottom center, for factory wired volume control.

• Attractive wood-finish assemblies are ideal for surface mounting speaker applications
• Assemblies include a hanger bracket and color coded speaker leads for fast wall mount installation
Read more
$44.99

List Price $79.90

Save 44% with CCI Solutions

Lowell RPAK810-72

Lowell RPAK810-72 1 Box System

1 Box System (2 Speaker Assemblies, 2 Backboxes, 2 T-Bridges)

Lowell's RPAK Systems include two dual cone drivers with a dual voltage transformer mounted to Lowell's popular steel grille (model WB8), two 8XD4 backboxes and two LBS8-R1 tile bridges.

The RPAK810-72 is an excellent choice for quality general purpose paging and distributed music applications where economy and installed costs are prime considerations. The 15W system includes industry standard 8" dual cone driver (model 810) with 10 oz. magnet, 45Hz - 13kHz +6dB frequency response and 95dB Avg sensitivity measured 1W/1M. Features molded high-fiber content cones to provide a smooth, extended response with a clean, natural sound. To facilitate a variety of distributed applications each assembly includes Lowell's versatile dual voltage 70/25V transformer (model TLM72) with primary taps at .5, 1, 2 and 4W.

The model WB8 grille is made of precision-formed steel and is factory-mounted to the speaker system drivers using welded studs and installs to the system backbox and tile bridge (both included) using four white screws (also provided).

The model 8XD4 backbox is formed from heavy-gauge galvanized steel with an acoustic pad and four 1/2 - 3/4" knockouts for conduit. The lip is punched for screw-mount installation or Twist'n Lock mounting of the backbox to system tile bridge (model LBS8-R1). Two backboxes are included in each system.

The model LBS8-R1 tile bridge transfers the speaker assembly weight to the ceiling support structure in suspended tile ceilings. Each RPAK system includes two galvanized steel tile bridges with Twist'n Lock mounting tabs and four wire-tie holes for seismic anchoring, if required.

Features:
• All-in-one speaker system with mounting accessories provide ordering and inventory convenience.
• System includes two 8" speakers with grille-mounted transformer, two backboxes and two tile bridges.
• Includes the industry-standard 15W dual cone driver Model 810.
• Backboxes and tile bridges (included) utilize Lowell's time-saving Twist'n Lock mounting method (may also be screw mounted, if preferred).
Read more
$89.99

+ Free Shipping

List Price $140.94

Save 36% with CCI Solutions

Lowell USVC-215

Lowell USVC-215 Utility Shelf

Utility Shelf Vented, Clamping

The USVC-series is engineered to provide secure mounting of non-rackmount equipment in 19" wide equipment racks and cabinets. The shelf is ideal for consumer electronics, power supplies and chassis-style components of all kinds. The 19"W x 15"D assembly features two, adjustable-height, "hold-down" brackets that clamp down on equipment to prevent unintentional movement. The clamps have a protective rubber strip to prevent marring of equipment. Two adjustable rear stops help hold components in place when buttons or controls are depressed. The USVC shelf is made from 16-gauge steel and has a front and rear flange (.438") for added strength. Bottom rear is vented and includes openings to adjust angle-bracket stop devices. Sides feature obround slots to adjust height of hold-down brackets. Load rating: 50 lbs. Black semi-gloss powder epoxy finish.

Features:
• Rugged 16-gauge US steel.
• Clamping brackets and rear stops to hold non-rackmount equipment.
• Vented bottom.
• 19"W (17.312" useable) x 15"D
• Three heights available: 2U, 3U, 4U
• Load Rating: 50 lbs.
• Black semi-gloss powder epoxy finish.
Read more
$59.99

+ Free Shipping

List Price $89.08

Save 33% with CCI Solutions

No Image Available
$22.99

List Price $30.84

Save 25% with CCI Solutions

Lowell 25LVC-RM

Lowell 25LVC-RM Attenuator

25W 70V/25V Rackmount

Lowell's LVC Series volume controls are ETL Listed, compact easy-to-install controls that provide precise level adjustment of single or multiple speaker lines. Choose 25W, 50W or 100W mod- els with standard, Decora-style, or adhesive rackmount plate. All models (including 100W versions) mount within a single gang E.O. Box with a minimum depth requirement of 2.125".

Standard, one-piece plates are offered in brushed stainless steel or plastic (white or ivory) versions. Decora-style two- piece plates are available in plastic (white, ivory or black) or with a stainless steel coverplate and a white or black plastic subplate. Rackmount models feature an adhesive dial scale with clear label area instead of a plate. All LVC Series volume controls have easy to connect, phoenix-style plug-in screw termination strips for pre-wire convenience with wire capacity up to 14gauge. Attenuation is 3dB per step or 1.5dB per step as noted.

Features:
• 100W, 50W, or 25W power rating.
• ETL Listed.
• Standard or Decora-style plate.
• Choice of plate material includes stainless steel or plastic in white, ivory or black as noted.
• Compact single gang size blends with other wall devices. l 2.125" depth fits standard E.O. boxes.
• May be used with RMP Series rack panels (order separately).
Read more
$22.99

List Price $33.58

Save 32% with CCI Solutions

Lowell 50LVC

Lowell 50LVC Attenuator

50W 3dB Stainless Steel Volume Attenuator

Lowell's LVC Series volume controls are UL Listed, compact easy-to-install controls that provide precise level adjustment of single or multiple speaker lines. Mounts within a single gang E.O.Box with a minimum depth requirement of 2.125". All LVC Series volume controls have easy to connect, phoenix-style plug-in screw termination strips for pre-wire convenience with wire capacity up to 14 gauge. Attenuation is 3dB per step or 1.5dB per step.

Features:
• 50W power rating.
• UL Listed under Standard UL813 and UL2043.
• Stainless Steel finish.
• Compact single gang size blends with other wall devices.
• 2.125" depth fits standard E.O. boxes.
Read more
$13.98

List Price $37.78

Save 63% with CCI Solutions

Lowell ANP-2

Lowell ANP-2 2 GANG VOLUME CONTROL

Single-Gang Blank Wall Plate

Wall plate blank with one VC scale 2 gang SS .

Lowell blank and punched wall plates are offered in a variety of styles to meet application needs. All include 6-32 hardware and feature countersunk mounting holes for installation to standard gang-size electrical boxes or Lowell surface box Series P1X.

Read more
$10.99

List Price $16.74

Save 34% with CCI Solutions

Lowell RPSW-KP
$64.99

List Price $97.96

Save 34% with CCI Solutions

Lowell UDP-214

Lowell UDP-214 Utility Drawer

2 RU Premium Utility Drawer with Lock

The UDP-series of utility drawers feature fully welded construction of 16-gauge steel, recessed drawer pull and slam latch with key lock. The drawers mount to front rack rails using standard EIA spacing and feature ball-bearing slides for smooth operation. They have a load capacity of 50 lbs. Smooth, black powder epoxy finish. Includes liner. Key-lock on front.

Features:
• Fully-welded 16-gauge US steel.
• Ball-bearing slides.
• Mounts on front rails of 19"W EIA rack.
• Load Capacity: 50 lbs.
• Smooth black powder epoxy finish.
• Front keylock.
• Made in the USA.
• Includes non-slip, perforated liner that provides a protective barrier between electronic accessories and the drawer's metal surface. 15.5" x 14".
Read more
$159.99

List Price $239.16

Save 33% with CCI Solutions

Lowell RSD-116

Lowell RSD-116 Reversible Shelf

Reversible Shelf / Drawer (1U, 16"D)

The RSD-116 is a reversible shelf / drawer for 19"W racks. The unit is precision-formed from 16-gauge US steel and features vents front and rear. Rear supports can be extended up to 33"D. When used as a shelf, it provides support for up to 80 lbs. of non-rackmount equipment such as consumer electronics, laptops, power supplies, and chassis-style components of all types. When mounted as a drawer, the RSD-116 provides ample storage space with 1.58" useable height for office supplies or electronics accessories. The RSD-116 mounts to the rack's front and rear mounting rails. Depending on rack model selected additional mounting rails may be needed (order separately). Smooth, black powder epoxy finish. Ships assembled, ready-to-install.

Features:
• Sturdy 16-gauge US steel.
• Supports up to 80 lbs.
• Rear supports can be extended to 33"D.
• Mounts to front and rear mounting rails. (Requires rear rail support; order rear mounting rails separately, if needed).
• Durable, smooth black powder epoxy finish.
• Front and rear vents.
• Ships ready-to-install.
Read more
$109.99

List Price $159.08

Save 31% with CCI Solutions