Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

SKB

Professional audio techs understand the value of SKB transport products. Maximum protection, effortless mobility, and in-use functionality. A wide variety of transport systems for mixers, rack systems and accessories including audio equipment cases and racks.

Showing 1 - 20 of 75 Products

SKB 1RMTF5-DHW Roto-Molded Mixer Case with Wheels

SKB 1RMTF5-DHW Roto-Molded Mixer Case with Wheels For Yamaha TF5 Mixer

The SKB 1RMTF5-DHW mixer case is a roto-molded moisture controlled flight case with custom interior for the Yamaha TF 5 32-channel mixing console. It has wheels and a lighter weight than previous bulky flight cases, making it ideal for flying and travel. The exterior is double walled roto-molded of Linear Medium Density Polyethylene (LMDP) for maximum strength and rigidity with four locking casters, six spring-loaded handles, and eight steel heavy-duty latches. The interior features custom foam blocks and a roto-molded hinged doghouse for management of all of the back connectors.

SKB 1RMTF5-DHW Features:

  • Roto-molded of Linear Medium Density Polyethylene (LMDP)
  • Double walled for max strength
  • Custom foam interior
  • Large rubber gasket in lid for moisture control
  • 4 locking casters
  • 6 spring-loaded handles
  • 8 heavy-duty steel latches
  • Hinged doghouse design for cable & connector management
Read more
$519.99

List Price $966.99

Save 46% with CCI Solutions

SKB 3i-2217-8B-C

SKB 3i-2217-8B-C Waterproof Case

Mil-std. waterproof case 8" deep with cubed foam, compare to Pelican 1600

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

Features & Benefits
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Locking loops to accept a customer supplied lock

Weights & Dimensions
• Interior Length 22.00 in
• Interior Width 17.00 in
• Interior Depth 8.00 in
• Carton Length 23.75 in
• Carton Width 19.63 in
• Carton Depth 9.00 in
• Lid Depth 2.00 in
• Base Depth 6.00 in
• Shipping Weight 16.00 lb
• Product Weight 13.30 lb
Read more
$209.99

List Price $379.99

Save 45% with CCI Solutions

SKB 1SKB-R2S

SKB 1SKB-R2S 

2U Molded Shallow Rack Case with Built-in Handles, 10.5" Rack Depth

The re-designed Roto-molded Shallow Rack Cases meet the needs of musicians and pro audio/video engineers. The new 1SKB-R2S now has a full front and rear cover instead of a rear access panel for easy access. Both doors have a rubber gasket to keep water out of the case.

The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush handles. With the addition of rear rack rails and the new cover design, the depth on the new Rotomolded Shallow Racks has been extended to 10.7" from front to rear rail. Gear can now be mounted front and rear with the supplied rackmount clips.

Features:
  • Roto-molded for strength and durability
  • Front and rear gasketed covers
  • Interlocking stacking ribs
  • Recessed latches
  • Heavy-duty flushmount handles
  • Shock absorbing rubber feet
  • Rackmount hardware included for secure mounting front or rear
Read more
$134.99

+ Free Shipping

List Price $212.99

Save 37% with CCI Solutions

SKB 3I-1209-4B-C

SKB 3I-1209-4B-C 

iSeries 1209-4 Waterproof Case (with cubed foam)

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

SKB 3I-1209-4B-C Features:
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
  • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Continuous molded-in hinge
  • Patented "trigger release" latch system
  • Rubber over-molded cushion grip handle
  • Layers of cubed foam for customization
  • Locking loops to accept a customer supplied lock
Read more
$84.99

List Price $150.99

Save 44% with CCI Solutions

SKB 1RMX32-DHW

SKB 1RMX32-DHW 

Roto-Molded Behringer X32 Mixer Case with Wheels

Custom interior for a X32 Behringer 32 Channel mixing console. This roto-molded moisture controlled flight case is lighter weight than previous bulky flight cases.

The exterior is double walled roto-molded of Linear Medium Density Polyethylene (LMDP) for maximum strength and rigidity with (4) locking casters, (6) spring loaded handles, (8) steel heavy-duty latches. The interior features custom foam blocks and a roto-molded hinged doghouse for management of all of the back connectors.

The overall weight is lighter than the equivalent road cases while providing maximum security in transport.

SKB 1RMX32-DHW Features:
  • Roto-molded of Linear Medium Density Polyethylene (LMDP)
  • Double walled for maximum strength
  • Large rubber gasket in the lid for moisture control
  • Four locking casters
  • Six spring loaded handles
  • Eight heavy-duty steel latches
  • Custom foam interior
  • Hinged doghouse design for cable and connector management
Read more
$519.99

+ Free Shipping

List Price $966.99

Save 46% with CCI Solutions

SKB 3i-4217-7B-L

SKB 3i-4217-7B-L Waterproof Case

Injection molded waterproof case with wheels layered foam, compare to Pelican 1780

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. In-line style wheels add to the portability of this case and the stainless steel protector clips provide added strength and security.

Features & Benefits
• Layered foam interior
• Patented trigger release latches can be retrofitted with TSA accepted key locking latches
• Padlock holes include stainless steel padlock protector clips
• Waterproof and dust tight design (MIL-C-4150J)
• Molded-in hinge for added protection
• Snap-down rubber over-molded cushion grip handle
• Ambient pressure equalization valve (MIL-STD-648C)
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Resistant to impact damage (MIL-STD-810F)
• Convenient In-line skate style wheels

Weights & Dimensions
• Interior Length 42.50 in
• Interior Width 17.00 in
• Interior Depth 7.50 in
• Carton Length 45.25 in
• Carton Width 19.63 in
• Carton Depth 8.38 in
• Lid Depth 2.00 in
• Base Depth 5.50 in
• Shipping Weight 27.00 lb
• Product Weight 24.50 lb
Read more
$299.99

+ Free Shipping

List Price $519.99

Save 42% with CCI Solutions

SKB 3i-2217-12B-D

SKB 3i-2217-12B-D Waterproof Case

Mil-std. waterproof case 12" deep with padded dividers, wheels and pull handle, compare to Pelican 1620

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

Features & Benefits
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patented "trigger release" latch system
• Rubber over-molded cushion grip handles
• Industrial strength injection molded pull handle
• In-line skate style wheels for easy transport
• TSA accepted key locking latches are available
• Stainless steel locking loops to accept a customer supplied lock
• Padded dividers for customization

Weights & Dimensions
• Interior Length 22.00 in
• Interior Width 17.00 in
• Interior Depth 12.75 in
• Carton Length 24.63 in
• Carton Width 19.69 in
• Carton Depth 14.50 in
• Lid Depth 2.00 in
• Base Depth 10.75 in
Read more
$289.99

+ Free Shipping

List Price $529.99

Save 45% with CCI Solutions

SKB 3i-5014-6B-L

SKB 3i-5014-6B-L Waterproof Case

Injection molded waterproof case with wheels, layered foam, compare to Pelican 1750

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. In-line style wheels add to the portability of this case and the stainless steel protector clips provide added strength and security.

Features & Benefits
• Layered foam interior
• Patented trigger release latches can be retrofitted with TSA accepted key locking latches
• Padlock holes include stainless steel padlock protector clips
• Waterproof and dust tight design (MIL-C-4150J)
• Molded-in hinge for added protection
• Snap-down rubber over-molded cushion grip handle
• Ambient pressure equalization valve (MIL-STD-648C)
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Resistant to impact damage (MIL-STD-810F)
• Convenient In-line skate style wheels

Weights & Dimensions
• Interior Length 50.50 in
• Interior Width 14.50 in
• Interior Depth 6.00 in
• Exterior Length 53.04 in
• Exterior Width 16.98 in
• Exterior Depth 6.84 in
• Carton Length 53.13 in
• Carton Width 17.25 in
• Carton Depth 7.00 in
• Lid Depth 1.50 in
• Base Depth 4.50 in
• Shipping Weight 24.85 lb
• Product Weight 22.30 lb
Read more
$289.99

+ Free Shipping

List Price $499.99

Save 42% with CCI Solutions

SKB 3I-2424-14BC

SKB 3I-2424-14BC 

24x24x14 Waterproof Case with Pull-Out Handle and Cubed Foam

The SKB Cases 3I Series of injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

SKB Cases 3I-2424-14BC Features:
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
  • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • Patented "trigger release" latch system
  • Rubber over-molded cushion grip handle
  • Stainless steel locking loops to accept a customer supplied lock
  • Industrial strength injection molded pull handle
  • In-line skate style wheels for easy transport
  • TSA accepted key locking latches are available
SKB Cases 3I-2424-14BC Specifications:
  • Interior Dimensions: Length: 24.00" (60.96cm)

  • Width: 24.00" (60.96cm)
    Depth: 14.00" (35.56cm)

  • Exterior Dimensions: Length: 26.50" (67.31cm)

  • Width: 26.54" (67.41cm)
    Depth: 15.65" (39.75cm)

  • Weight: 24.40 lbs (11.07 kg)
  • Read more
    $289.99

    + Free Shipping

    List Price $581.99

    Save 50% with CCI Solutions

    SKB 3i-2217-10B-D

    SKB 3i-2217-10B-D Waterproof Case

    Mil-std. waterproof case 10" deep with padded dividers, compare to Pelican 1610

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

    Features & Benefits
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Continuous molded-in hinge
    • Patented "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Convenient wheels and pull handle
    • Padded dividers for organization and protection
    • Locking loop to accept a customer supplied lock

    Weights & Dimensions
    • Interior Length 22.00 in
    • Interior Width 17.00 in
    • Interior Depth 10.50 in
    • Carton Length 25.25 in
    • Carton Width 19.75 in
    • Carton Depth 12.75 in
    • Lid Depth 2.00 in
    • Base Depth 8.50 in
    Read more
    $264.99

    List Price $519.99

    Save 49% with CCI Solutions

    SKB 1SKB-R12U

    SKB 1SKB-R12U 

    12U Roto Rack

    The re-designed Roto-molded Rack Cases meet the needs of musicians and pro audio engineers. The new Roto Racks include a gasketed full front and rear covers for easy access.

    These re-designed Roto Racks have a new exterior design that includes a recognizable bar design that signifys the rack size on the front and rear covers with interlocking capabilities for a secure stack with Roto Racks and the new Roto Shallow Racks. Recessed steel, Mil-Spec black twist latches, and new heavy-duty flush handles, front and rear rack rails with a rack depth of 17.6" so gear can now be mounted front and rear with the supplied rackmount clips.

    Features:
    • Roto-molded for strength and durability
    • Front and rear gasketed covers
    • Interlocking stacking ribs
    • New size bar cover design
    • Recessed latches
    • Heavy-duty flushmount handles
    • Rackmount hardware included for secure mounting front or rear
    Specifications:
    • Interior Width: 19.00 in (48.26 cm)
    • Interior Height: 21.00 in (53.34 cm)
    • Rackable Depth: 17.60 in (44.70 cm)
    • Rack Units Total: 12
    Read more
    $254.99

    + Free Shipping

    List Price $425.99

    Save 40% with CCI Solutions

    SKB 3i-2217-10B-C

    SKB 3i-2217-10B-C Waterproof Case

    Mil-std. waterproof case 10" deep with cubed foam, pull handle and wheels, compare to Pelican 1610

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    Features & Benefits
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Molded-in hinge
    • Patented "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Locking loops to accept a customer supplied lock
    • Industrial strength injection molded pull handle
    • In-line skate style wheels for easy transport
    • TSA accepted key locking latches are available
    • Cubed foam for customization

    Weights & Dimensions
    • Interior Length 22.00 in 55.88 cm
    • Interior Width 17.00 in 43.18 cm
    • Lid Depth 2.00 in 5.08 cm
    • Base Depth 8.50 in 21.59 cm
    Read more
    $249.99

    + Free Shipping

    List Price $441.99

    Save 43% with CCI Solutions

    SKB 3I-2015-10BC

    SKB 3I-2015-10BC Waterproof Case

    Mil-std. waterproof case 10" deep with cubed foam, wheels and pull handle, compare to Pelican 1560

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

    Features & Benefits
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Continuous molded-in hinge
    • Patent pending "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Convenient two stage pull handle
    • Built-in wheels
    • Cubed foam interior
    • Locking loop to accept a customer supplied lock

    Weights & Dimensions
    • Interior Length 20.50 in
    • Interior Width 15.50 in
    • Interior Depth 10.00 in
    • Carton Length 22.25 in
    • Carton Width 18.75 in
    • Carton Depth 12.00 in
    • Lid Depth 2.00 in
    • Base Depth 8.00 in
    • Shipping Weight 18.00 lb
    • Product Weight 15.80 lb
    Read more
    $239.99

    + Free Shipping

    List Price $436.99

    Save 45% with CCI Solutions

    SKB 3I-1914-8B-D

    SKB 3I-1914-8B-D Waterproof Case

    Mil-std. waterproof case 8" deep with dividers, wheels and pull handle

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

    Features & Benefits
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Continuous molded-in hinge
    • Patent pending "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Two stage pull handle
    • Built-in wheels
    • Padded dividers for convenience and protection

    Weights & Dimensions
    • Interior Length 19.00 in
    • Interior Width 14.38 in
    • Interior Depth 8.00 in
    • Carton Length 21.75 in
    • Carton Width 17.13 in
    • Carton Depth 10.25 in
    • Lid Depth 2.00 in
    • Base Depth 6.00 in
    • Shipping Weight 15.00 lb
    • Product Weight 14.40 lb
    Read more
    $239.99

    + Free Shipping

    List Price $436.99

    Save 45% with CCI Solutions

    SKB 1SKB-R10U

    SKB 1SKB-R10U 

    Roto Rack

    The re-designed Roto-molded Rack Cases meet the needs of musicians and pro audio engineers. The new Roto Racks include a gasketed full front and rear covers for easy access.

    These re-designed Roto Racks have a new exterior design that includes a recognizable bar design that signifys the rack size on the front and rear covers with interlocking capabilities for a secure stack with Roto Racks and the new Roto Shallow Racks. Recessed steel, Mil-Spec black twist latches, and new heavy-duty flush handles, front and rear rack rails with a rack depth of 17.6" so gear can now be mounted front and rear with the supplied rackmount clips.

    Features:
    • Roto-molded for strength and durability
    • Front and rear gasketed covers
    • Interlocking stacking ribs
    • New size bar cover design
    • Recessed latches
    • Heavy-duty flushmount handles
    • Rackmount hardware included for secure mounting front or rear
    Read more
    $239.99

    + Free Shipping

    List Price $399.99

    Save 40% with CCI Solutions

    SKB 3I-2424-14BE

    SKB 3I-2424-14BE 

    iSeries 2424-14 Waterproof Case (empty)

    Injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

    The unique features and dimensions of this model are outlined below.

    Features:
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Molded-in hinge
    • Patented "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Stainless steel locking loops to accept a customer supplied lock
    • Industrial strength injection molded pull handle
    • In-line skate style wheels for easy transport
    • TSA accepted key locking latches are available
    Specifications:
    • Interior Length: 24.00 in (60.96 cm)
    • Interior Width: 24.00 in (60.96 cm)
    • Interior Depth: 14.00 in (35.56 cm)
    Read more
    $239.99

    + Free Shipping

    List Price $441.99

    Save 46% with CCI Solutions

    SKB 3I-4214-5B-L

    SKB 3I-4214-5B-L Waterproof Case

    Mil-std. injection molded waterproof case with layered foam, compare to Pelican 1720

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. In-line style wheels add to the portability of this case and the stainless steel protector clips provide added strength and security.

    Features & Benefits
    • In-line skate style wheels for easy transport
    • Patented trigger release latches can be retrofitted with TSA accepted key locking latches
    • Padlock holes include stainless steel padlock protectorclips
    • Layered foam for protection
    • Waterproof and dust tight design (MIL-C-4150J)
    • Molded-in hinge for added protection
    • Snap-down rubber over-molded cushion grip handle
    • Ambient pressure equalization valve (MIL-STD-648C)
    • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
    • Resistant to impact damage (MIL-STD-810F)
    • Convenient In-line skate style wheels

    Weights & Dimensions
    • Shipping Weight 22.40 lb
    • Product Weight 19.20 lb
    Read more
    $239.99

    + Free Shipping

    List Price $414.99

    Save 42% with CCI Solutions

    SKB 3I-1914-8BTC

    SKB 3I-1914-8BTC Waterproof Case

    Mil-std. waterproof case 8" deep with cubed foam, wheels and pull handle

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

    Features & Benefits
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Continuous molded-in hinge
    • Patent pending "trigger release" latch system
    • Rubber over-molded cushion grip handle
    • Two stage pull handle
    • Built-in wheels
    • Cubed foam for customization
    • TSA recognized and accepted lock

    Weights & Dimensions
    • Interior Length 19.00 in
    • Interior Width 14.38 in
    • Interior Depth 8.00 in
    • Carton Length 21.75 in
    • Carton Width 17.13 in
    • Carton Depth 10.25 in
    • Lid Depth 2.00 in
    • Base Depth 6.00 in
    • Shipping Weight 16.00 lb
    • Product Weight 14.65 lb
    Read more
    $234.99

    + Free Shipping

    List Price $425.99

    Save 45% with CCI Solutions

    SKB 3i-3614-6B-L

    SKB 3i-3614-6B-L Waterproof Case

    Mil-std. waterproof case 6" deep with cubed foam, wheels and pull handle, compare to Pelican 1700

    Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. Interior options on most models include cubed foam, layered foam, padded dividers, or an empty interior.

    3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. In-line style wheels add to the portability of this case and the stainless steel protector clips provide added strength and security.

    Features & Benefits
    • In-line skate style wheels for easy transport
    • Patented trigger release latches can be retrofitted with TSA accepted key locking latches
    • Padlock holes include stainless steel padlock protectorclips
    • Cubed foam for customer customization
    • Molded-in hinge for added protection
    • Snap-down rubber over-molded cushion grip handle
    • Ambient pressure equalization valve (MIL-STD-648C)
    • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
    • Resistant to impact damage (MIL-STD-810F)
    • Convenient In-line skate style wheels

    Weights & Dimensions
    • Interior Length 36.50 in
    • Interior Width 14.50 in
    • Interior Depth 6.00 in
    • Carton Length 39.75 in
    • Carton Width 17.75 in
    • Carton Depth 7.50 in
    • Lid Depth 1.50 in
    • Base Depth 4.50 in
    • Shipping Weight 20.00 lb
    • Product Weight 17.50 lb
    Read more
    $229.99

    List Price $374.99

    Save 39% with CCI Solutions

    SKB 1SKB-R8U

    SKB 1SKB-R8U 

    8U Roto-Molded Rack Case

    The re-designed Roto-molded Rack Cases meet the needs of musicians and pro audio engineers. The new Roto Racks include a gasketed full front and rear covers for easy access.

    These re-designed Roto Racks have a new exterior design that includes a recognizable bar design that signifys the rack size on the front and rear covers with interlocking capabilities for a secure stack with Roto Racks and the new Roto Shallow Racks. Recessed steel, Mil-Spec black twist latches, and new heavy-duty flush handles, front and rear rack rails with a rack depth of 17.6" so gear can now be mounted front and rear with the supplied rackmount clips.

    Features:
    • Roto-molded for strength and durability
    • Front and rear gasketed covers
    • Interlocking stacking ribs
    • New size bar cover design
    • Recessed latches
    • Heavy-duty flushmount handles
    • Rackmount hardware included for secure mounting front or rear
    Read more
    $219.99

    + Free Shipping

    List Price $363.99

    Save 40% with CCI Solutions