Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

Microphone Windscreens

Showing 1 - 20 of 31 Products

CCI Solutions (CCI-COLORMAGSET)Color Magnet Labels

CCI Solutions (CCI-COLORMAGSET)Color Magnet Labels For Mixer Faders - (7 Count)

CCI Solutions' Color Magnet Labels are easily attached and removed from most mixers and enable you to identify which instrument or vocal is assigned to each of your mixer's faders. Use these color magnet mixer labels with matching color windscreens and color mic cables to easily know which mic is which. 1” by .5” magnetic strips fit on almost any console with a metal surface.

Color Magnet Labels Features:
  • Identify different mics with 7 different magnetic strip colors: yellow, green, blue, black, pink, red and orange
  • Perfectly matched colored magnetic strips go great with CCI Solutions windscreens
  • Magnets fit on most metal consoles
  • Individual magnet dimensions: 1” W x 0.5” H
Read more
$3.99
Shure (WA615M) Colored ID Rings

Shure (WA615M) Colored ID Rings For Handheld Mics

The WA615M is a set of five colored ID rings (white, blue, yellow, orange, & red) for all Shure handheld wireless models (except UT Series). Users can attach these coated plastic rings to the bottom of their handheld mics for more easy identification.

Features:

  • 5 plastic coated colored ID rings
  • Fits all Shure wireless handhelds (except UT)
  • Colors: white, blue, yellow, orange, & red
Read more
$15.00
Audio-Technica AT-8146

Audio-Technica AT-8146 Small Foam Windscreens

Audio-Technica Small Foam Windscreen (3pack)

    AT8146 by Audio-Technica is a small foam windscreen designed to fit over the Audio Technica PRO49Q gooseneck microphone.

Read more
$11.99

List Price $14.00

Save 14% with CCI Solutions

Audio-Technica AT-AT8151-TH

Audio-Technica AT-AT8151-TH 

Audio-Technica Foam Windscreen for AT898 and AT899 (3-Pack, Beige)

    With speaking and environmental noise reduction in mind The AT8151-TH Foam Windscreens Set was designed for Audio-Technica's AT898 and AT899 subminiature omnidirectional condenser lavalier microphones.

Read more
$12.99

List Price $17.00

Save 24% with CCI Solutions

Audio-Technica AT-8154

Audio-Technica AT-8154 2-Stage Foam Uniline Windscreen (Black)

Audio-Technica AT8154 Foam Uniline Windscreen (Black)

    Specializeing in earth-shaking audio devices,Audio-Technica allows you get pin-drop sound quality that makes all the difference. With the AT8154 2-Stage Foam Uniline Windscreen (Black), your second-stage microphone will deliver a crisp sound, full of the elements you want and free of those you don't. Made especially for Audio-Technica case styles: M32, M33, and M35.

    Unilines are designed to get right in the game, without getting in the way; a slim boomline catches the entire story, while the 2-stage mic filters out what's unimportant. The outer shell slows approaching air and any remaining noise is captured by the second-stage, blimp-screen barrier.

Read more
$18.49

List Price $23.00

Save 20% with CCI Solutions

Audio-Technica AT-AT8129

Audio-Technica AT-AT8129 Miniature Foam Lavalier Windscreen

Audio-Technica AT8129

    The AT8129 foam lavalier windscreen is designed to fit most subminiature lavalier microphones.

    Read more
    $11.99

    List Price $16.00

    Save 25% with CCI Solutions

    Audio-Technica AT-AT8157

    Audio-Technica AT-AT8157 Windscreens for AT892 Head-worn Microphone (Set of 3) (Black)

    Audio-Technica AT8157 Microphone - Set of 3 - Black

      The Audio-Technica AT8157 Windscreens are designed to eliminate wind noise, popping and associated noise for the AT892 Head-worn Microphone element. The windscreen secures over the element and is sold in a package of three.

    Read more
    $13.99

    List Price $17.00

    Save 18% with CCI Solutions

    Audio-Technica AT-AT8157-TH

    Audio-Technica AT-AT8157-TH Windscreens for AT892 Head-worn Audio-Technica Microphone (Set of 3) (Beige)

    Windscreens for AT892 Head-worn Microphone - Set of 3 - Beige

      The Audio-Technica 8157-TH Windscreens (Beige) are designed to eliminate wind noise, popping and associated noise for the AT892 Head-worn Microphone element. The windscreen secures over the element and is sold in a package of three.

    Read more
    $12.99

    List Price $17.00

    Save 24% with CCI Solutions

    Countryman COU-A4WSB

    Countryman COU-A4WSB ISOMAX 4RF windscreen (Black)

    Countryman for 4RF microphone

      The ISOMAX 4RF Windscreen from Countryman provides protection from wind or breath noise.

      Features

    • ISOMAX 4RF windscreen
    • Fits ISOMAX 4
    • Protects against plosives, surface noise, wind noise, etc.
    Read more
    $15.25
    JBL MTC-14WG

    JBL MTC-14WG Speaker Grilles

    High-Humidity Grilles for Control 10 Series Ceiling Speakers White
    (Priced as each, must be purchased in even quantities.)

    The white JBL MTC-14WG high-humidity accessory grilles allow the Control 10 Series 12C/T and 14C/T Ceiling Speakers to be used in environments with high humidity. The aluminum alloy material does not rust, and the durable powder-coated finish prevents pitting that could otherwise occur with raw unfinished aluminum. The white polyester finish matches the look of the speaker. The grille installs in place of the one that comes with the speaker and can be attached by press-fitting it directly onto the speaker (pressing closer to the edges is recommended so as not to dent the grille due to too much pressure at one location). A scrim is glued to the back of the grille to help break up driving precipitation that might reach the speakers.

    Features:

    • For use with Control 12C/T & 14C/T Ceiling Speakers
    • Non-rusting aluminum construction for protection & color-matched polyester powder-coated satin finish for aesthetic appearance
    • Allows speakers to be used in high-humidity applications & in some protected/covered outdoor areas
    • RAL9010 white
    Read more
    $18.00
    JBL MTC-14WG-BK

    JBL MTC-14WG-BK Speaker Grilles

    High-Humidity Grilles for Control 10 Series Ceiling Speakers Black
    (Priced as each, must be purchased in even quantities.)

    The black JBL MTC-14WG high-humidity accessory grilles allow the Control 10 Series 12C/T-BK and 14C/T-BK Ceiling Speakers to be used in environments with high humidity. The aluminum alloy material does not rust, and the durable powder-coated finish prevents pitting that could otherwise occur with raw unfinished aluminum. The black polyester finish matches the look of the speaker.

    The grille installs in place of the one that comes with the speaker and can be attached by press-fitting it directly onto the speaker (pressing closer to the edges is recommended so as not to dent the grille due to too much pressure at one location). A scrim is glued to the back of the grille to help break up driving precipitation that might reach the speakers.

    Note: For painting, do not remove the backing. Paint the grilles lightly enough to color the grille without clogging the grille backing.

    JBL MTC-14WG Features:

    • For use with Control 12C/T-BK & 14C/T-BK Ceiling Speakers
    • Non-rusting aluminum construction for protection & color-matched polyester powder-coated satin finish for aesthetic appearance
    • Allows speakers to be used in high-humidity applications & in some protected/covered outdoor areas
    • RAL9004 black
    Read more
    $18.00
    JBL MTC-16WG

    JBL MTC-16WG Speaker Grilles

    High-Humidity Grilles for Control 10 Series Ceiling Speakers
    (Priced as each, must be purchased in even quantities.)

    The white JBL MTC-16WG high-humidity accessory grilles allow the Control 10 Series 16C/T, 26C, and 26CT Ceiling Speakers to be used in environments with high humidity. The aluminum alloy material does not rust, and the durable powder-coated finish prevents pitting that could otherwise occur with raw unfinished aluminum. The white polyester finish matches the look of the speaker. The grille installs in place of the one that comes with the speaker and can be attached by press-fitting it directly onto the speaker (pressing closer to the edges is recommended so as not to dent the grille due to too much pressure at one location). A scrim is glued to the back of the grille to help break up driving precipitation that might reach the speakers.

    Features:

    • For use with Control 16C/T, 26C, & 26CT Ceiling Speakers
    • Non-rusting aluminum construction for protection & color-matched polyester powder-coated satin finish for aesthetic appearance
    • Allows speakers to be used in high-humidity applications & in some protected/covered outdoor areas
    • RAL9010 white
    Read more
    $22.00
    JBL MTC-16WG-BK

    JBL MTC-16WG-BK Speaker Grilles

    High-Humidity Grilles for Control 10 Series Ceiling Speakers Black
    (Priced as each, must be purchased in even quantities.)

    The black JBL MTC-16WG high-humidity accessory grilles allow the Control 10 Series 16C/T-BK Ceiling Speaker to be used in environments with high humidity. The aluminum alloy material does not rust, and the durable powder-coated finish prevents pitting that could otherwise occur with raw unfinished aluminum. The black polyester finish matches the look of the speaker.

    The grille installs in place of the one that comes with the speaker and can be attached by press-fitting it directly onto the speaker (pressing closer to the edges is recommended so as not to dent the grille due to too much pressure at one location). A scrim is glued to the back of the grille to help break up driving precipitation that might reach the speakers.

    Note: For painting, do not remove the backing. Paint the grilles lightly enough to color the grille without clogging the grille backing.

    JBL MTC-16WG Features:

    • For use with Control 16C/T-BK Ceiling Speaker
    • Non-rusting aluminum construction for protection & color-matched polyester powder-coated satin finish for aesthetic appearance
    • Allows speakers to be used in high-humidity applications & in some protected/covered outdoor areas
    • RAL9004 black
    Read more
    $22.00
    Samson SASE50TWS

    Samson SASE50TWS Windscreens

    Windscreen for SE10T/SE50T - 3 Pack

    The Samson SASE50TWS windscreens for the Samson SE10T or SE50T. Color, beige, available in packs of 3.

    Read more
    $9.99

    List Price $15.99

    Save 38% with CCI Solutions

    Sennheiser (MZW 1) Windscreen

    Sennheiser (MZW 1) Windscreen - Foam

    For the SKM-100, -300, and -500

    The Sennheiser MZW1 Foam Windscreen minimizes light wind and popping noise for the Evolution wireless and wired handheld microphones, and is designed to fit the SKM100, 300 and 500 handheld transmitters.

    Read more
    $15.95

    List Price $19.95

    Save 20% with CCI Solutions

    Sennheiser (MZW3-EW) Windscreen

    Sennheiser (MZW3-EW) Windscreen - Foam

    For ME3 Microphone

    The Sennheiser MZW-3EW is a foam windscreen for the ME3 lavalier microphone.

    Read more
    $12.03
    Sennheiser (MZW4-EW) Windscreen

    Sennheiser (MZW4-EW) Windscreen - Foam

    For ME4 Microphone

    The Sennheiser MZW4EW is a foam windscreen for the ME4 lavalier microphone.

    Read more
    $9.25
    Sennheiser (MZW 66) Windscreen

    Sennheiser (MZW 66) Windscreen - Foam

    For ME66 Microphone - Grey

    Sennheiser MZW66 standard grey foam windscreens reduce wind and popping noise for ME-66

    Read more
    $54.95

    List Price $69.95

    Save 21% with CCI Solutions

    Shure (A412MWS) Microphone Windscreen

    Shure (A412MWS) Microphone Windscreen (Black)

    Locking, Metal

    The Shure A412MWS locking metal windscreen features aoustically transparent material that reduces unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications.

    Read more
    $19.00
    Shure A57AWS Locking Windscreen
    $10.00

    Call today to speak with an audiovisual and lighting expert 800.562.6006

    Contact Us

    info@ccisolutions.com

    800-562-6006
    360-943-5378
    Fax 360-754-1566

    1342 88th Avenue SE
    Tumwater, WA 98501-5716
    Hours M-F 7-5 PST

    Additional Info

    About Us

    Customer Reviews

    Newsletter Sign-Up

    SSL site seal - click to verify
    Seattle Nashville Los Angeles

    © 2018 CCI Solutions