{ "Audio Outputs" : "16 channels, balanced", "Outputs" : [ "DB25 multipin connectors (2)", "Tascam® analog audio pinout", "Impedance balanced output for mic", "+4dBu, and +18dBu; differential output for +24dBu" ], "D/A Conversion" : "48kHz sample rate, 24 bit", "Frequency Response" : "4Hz-22kHz", "A-Net Input/Output" : "one EtherCon Category 5 (RJ45 connector)", "A-Net Expansion" : "one EtherCon Category 5 (RJ45 connector)", "Output Level Settings" : "Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic", "Channel LED Indicators" : "Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic", "Metering" : "LEDs; green: Signal Present; red Clip; per channel", "Maximum Output Level" : "+24dBu", "Output Impedance" : "226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)", "Freq. Response" : "4Hz-22kHz +0.2dB/-3dB", "THD +N" : "< 0.004%", "Crosstalk" : "-90dB", "Bit Error Rate (BER)" : "10(-12)", "Signal to Noise (unweighted)" : [ "92dB typical, A/D to D/A", "Measured from AN-16/i to AN-16/o v.4 Output Module" ], "Digital Connections" : { "A-Net In" : " 1", "A-Net Out" : "1", "A-Net Expansion" : "1;", "Neutrik EtherCon connectors" : "" }, "A-Net Pro16" : [ "A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;", "uses unshielded Cat-5e UTP (or better) cable" ], "Latency" : "<0.620 msec (measured from analog input to analog output)", "Power Supply" : "External, DC, universal switching type", "Input Voltage" : "100-240 volts, 50/60Hz, 30VA", "Output Voltage" : "24 VDC, 0.5 amp", "Plug Size" : "2 mm", "Power" : "24 VDC, 500mA", "Dimensions" : "19" (482.6 mm) wide x 5.75" (146 mm) deep;,1U high", "Weight" : "6.8 lbs. (3.08 kg)", "Options" : "AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable" } |