cart Video checkout my account login about us contact us
 
800 562-6006
 
AV Products Systems Integration CD/DVD Media
 
Sound Video Lighting Recording Cables Brands Rebates & Deals Clearance WorshipTools Giveaways
CCI Solutions > M-SM03 > Sound > Audio Amplifiers > Crown Power Amplifier

Crown Power Amplifier - 2-Channel

650-3200-watts @ 2-8 Ohms, peak plus limiters and subharmonic synth section

  • Description
  • Specifications
  • Downloads
  • Videos
  • Reviews/Ratings

One of the Most Powerful and Innovative Amplifiers On the Market Today!

The Crown XTi 4002 pro audio amplifier is one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value. Crown's XTi series sports impressive features such as Peak Plus™ limiters, enhanced subharmonic synth sections for system-specific tuning, and almost 50 user definable presets.

Features:

  • Peak Plus Limiters
  • Enhanced Subharmonic Synth
  • 3 User-defined fan mode controls mfor matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect control software
  • Increased number of presets to a total of 50; 49 of which are user definable
Specifications for the Crown Power Amplifier
Crown XTi 4002 Specifications:

Sensitivity (for full rated power at 4 ohms)

1.4 Vrms

Frequency Response (at 1 watt, 20 Hz - 20 kHz)

+0 dB, –1 dB

Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms)

XTi1002/2002/4002: 100 dB (A weighted)
XTi6002: 103 dB (A weighted)

Total Harmonic Distortion (THD)

< 0.5%

Damping Factor 20 Hz to 1 kHz

> 500

Crosstalk (below rated power)

20 kHz - 1 kHz: > 70 db

Input Impedance (nominal)

20k ohms balanced, 10k ohms unbalanced

Maximum Input Signal

+22 dBu typical

AC Line Voltage and Frequency Configurations

100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

AC Line Current
(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)

XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle

Operating Temperature

0°C to 40°C at 95% relative humidity (non-condensing)

PERFORMANCE

Level

Two front-panel rotary level controls, one for each channel

Power Switch

On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons

Three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen

Backlit liquid crystal display that shows preset and processing status

Indicators

Signal Indicator

Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

10 Indicator

Green LED flashes when output signal exceeds -10 dB below clip.

20 Indicator

Green LED flashes when output signal level exceeds -20 dB below clip.

Ready Indicator

Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator

Red LED, one per channel, turns on at the threshold of audible distortion

Temp Indicator

Red LED, one per channel, illuminates under excessive temperature conditions

Power Indicator

Blue LED illuminates when the amplifier has been turned on and has power

Input/Output Connectors

Input Connectors

XLR, one per channel

Link/Out Connector

Loop-thru signal from input connector for linking another amplifier, one per channel.

Output Connectors

Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).

HiQnet USB Connector

Type B, connects to HiQnet network.

Construction

Chassis

Steel

Front Panel

Cast-aluminum

Cooling

Proportional speed fan with front-to-rear airflow.

Dimensions

XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D)
XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D)

Net Weight

XTi 1002/2002/4002: 18.5 lbs (8.4kg)
XTi 6002: 24.0 lbs (10.9kg)

Shipping Weight

XTi 1002/2002/4002: 21.5 lbs (9.8kg)
XTi 6002: 30.0 lbs (13.6kg)

See The Spec Sheet (PDF)

Research the Crown XTi 4002


We've added additional technical information in easy download PDF format to help research the Xti 4002. Our goal is to help you get the answers you need as easily as possible.

XTi2 Series Operation Manual

XTi2 Datasheet

Get it Right the Easy Way - Talk to a Stereo Amplifier Expert!


We encourage you to save time and talk to one of our award winning CTS certified product consultants. That's the easiest way to know you're getting the right amp for your application.
Overall Rating:  N/A Number of Reviews: 0
Email Power Amplifier page to a friend E-mail this product page to a friend
 
Customers Also Liked
Crown Power Amplifier
Crown Power Amplifier
500W @ 4Ω
 
$698.00
   
Free Shipping  
Buy the Crown Power Amplifier Now
Crown Power Amplifier
Crown Power Amplifier
800W @ 4Ω
 
$999.98
   
Free Shipping  
Buy the Crown Power Amplifier Now
Crown Power Amplifier
Crown Power Amplifier
350 Watt
 
$299.00
   
Free Shipping  
Buy the Crown Power Amplifier Now
Crown Power Amplifier
Crown Power Amplifier
525 Watt
 
$399.00
   
Free Shipping  
Buy the Crown Power Amplifier Now
Crown Power Amplifier
Crown Power Amplifier
650 Watt
 
$499.00
   
Free Shipping  
Buy the Crown Power Amplifier Now