Talk to an expert
M-F 8am to 5pm PST
800-562-6006
info@ccisolutions.com

QSC GXD8 Professional Power Amplifier (GXD8) with Peak 4500W

Onboard DSP, large LCD display, built-in powerful loudspeaker

What's in the box:

  • QSC GXD 8
  • IEC Power Cord
  • Limited Three-Year Warranty

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
$1,099.99
Save 20%
−$220.00
CCI Price
$879.99
Availability
Ships diredtly to you from QSC
Usually Ships
7 to 10 Days
Item Number 
QSC-GXD8
Vendor Part
GXD8

The GXD Series Amplifiers are ideal for entertainment and production applications requiring performance and the convenience of integral signal processing. The hallmarks of the QSC brand - professional audio quality, engineering and manufacturing focused on long-term reliability - are all intrinsic to GXD. Add contemporary styling, multiple routing options, light weight, digital signal processing and advanced protection circuitry, and the GXD Series clearly represents economic real value. The GXD series is optimized for use with 8 and 4 ohm loudspeaker loads. GXD amplifiers deliver just the right amount of power to the most popular speakers used by entertainers and production professionals.

Features:

  • High peak output power and a whopping 4500 Watts
  • Power levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4Ω and 8Ω speaker systems
  • Class-D output stage with a universal power supply for high performance and efficiency
  • Extensive and powerful loudspeaker processing built in. Includes High & Low-Pass filters, 4-band PEQ, Limiting, and Delay
  • Large LCD display simplifies amplifier setup and indicates amp status
  • The digital limiter used in the GXD amplifiers is set to prevent the amplifier from being driven into clipping
  • Inputs: Parallel XLR and 1/4" TRS connectors for compatibility with any source while providing convenient loop-thru capability
  • Precision rotary encoders for gain and DSP parameter control
  • Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
  • Digital Limiting automatically protects the amplifier from damage due to temperature rise or overdrive
  • Adjustable speaker protection to match your loudspeaker's power and impedance
  • Front panel LEDs indicate signal presence, input overload, and amplifier clipping

Be sure to check out the brochure for more information!

Specifications for the QSC GXD8 Professional Power Amplifier

{ "Stereo Mode - Watts Per Channel:" : { "8 Ohm Peak, Both Channels Driven" : "1500 Watts ", "4 Ohm Peak, Both Channels Driven" : "2250 Watts ", "8 Ohm Continuous, Both Channels Driven" : "800 Watts ", "4 Ohm Continuous, Both Channels Driven" : "1200 Watts" }, "Distortion (typical, 1 kHz at full ratedpower)" : "< 1% THD", "Signal-to-Noise Ratio (A-weighted, 20 Hz - 20 kHz)" : "100 dB", "Input Sensitivity" : "1.2 Vrms, 3.9 Vrms", "Voltage Gain (8 Ohms)" : "33.5 dB", "Output Circuitry" : "Class D", "Power Requirements - 1/8 Power at 4Ohms:" : { "100 VAC" : "6.2 Amps ", "120 VAC" : "5.6 Amps ", "230 VAC" : "3.2 Amps" }, "Frequency Response" : "20 Hz - 20 kHz, +0.7 dB,-0.8 dB", "Dynamic Headroom (4 Ohms)" : "2.73 dB", "Damping Factor" : "100", "Input Impedance" : "20 kOhms (balanced), 10 kOhms (unbalanced)", "Maximum Input Level" : "+23.5 dBu", "Input Connectors (each channel)" : "3-pin XLRF / 1/4" TRS, balanced", "Output Connectors (each channel)" : "NL4 (Channel1 - 1+/-, Channel 2 - 2+/-), binding posts", "Amplifier and Load Protection:" : [ "Short circuit ", "Open circuit ", "Thermal ", "RF protection ", "Load protected against DC faults" ], "Front Panel Controls and Indicators:" : [ "2x Rotary Encoders ", "3x Operational Buttons (HOME, ENTER, EXIT) ", "2x Green Signal LEDs, indicates signal presence ", "2x Red A/D Clip LEDs, indicate input over-drive and/or amplifier current clipping ", "Blue Power LED ring, AC on ", "2.12" x 1.0", 256 x 128 pixel LCD panel" ], "DSP Functions:" : [ "High Pass Filter, 4th order LR, adjustable Frequency 20 Hz to 4 kHz ", "Low Pass Filter, 4th order LR, adjustable Frequency 60 Hz to 4 kHz ", "4-band PEQ, with variable Frequency, Gain, and Bandwidth ", "Peak Limiter, with Power, Agressiveness, and Impedance selection ", "Delay 50 msec max." ], "Dimensions (HxWxD)" : "3.5" (2RU) x 19" x 10.2" (89mm x 483mm x 259mm)", "Weight" : "13.2 lbs (6.0 kg)", "Agency Approvals" : "UL, CE, RoHS/WEEE Compliant", "Carton and Contents" : "Power cable and quick start guide" }