Customer Reviews

WE'RE OPEN! M-F 8am to 5pm PST

Radial (R800 1028) Re-Amplifier - Activeq

Active Re-Amplifier

No reviews yet. Leave a review

What's in the box:

  • Radial Engineering X-Amp - Active Re-Amplifying Device
  • External Power Supply
  • Three (3) Warranty

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
Save 9%
CCI Price
Usually Ships
7 to 10 Days
Item Number 
Vendor Part

The Radial X-Amp is an active Reamper™ that allows engineers to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.

Using the X-Amp is easy: start by recording a dry track using a high quality direct box like the Radial J48. Send the new track from your recorder via the X-Amp to your guitar amps, effect pedals, or combinations thereof. Once the basic track has been recorded, replacing or adding tracks can be done well after the session player has gone home. This eliminates tiresome repetition and assures a fresh vibrant performance on the final recording. Furthermore, by driving two amps at the same time, new sounds and textures can be created while you make artistic decisions as the recording progresses.

Following the critically acclaimed Radial JD7 Injector, the X-Amp employs a unique class-A circuit design optimized for use with guitars. Features include balanced line-level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.

As with all Radial products, the X-Amp is built like a tank to provide years of trouble-free performance. An internal I-beam skeleton provides maximum protection against external stress which could cause solder points to fail. This is supplemented with an innovative bookend design that creates a protective zone around the switches, potentiometer, and connectors. A full bottom no-slip pad performs double duty by keeping the X-Amp from sliding around when placed on a vibrating amplifier while also providing electrical and mechanical isolation. Reamping works equally well on bass, keyboards, drums, and voice. Once you start Reamping, you won't want to record any other way!

Radial X-Amp Features:

  • Active Reamp® with 2 outputs
  • Replace/Add tracks well after recording session is done
  • Make artistic decisions as recording progresses
  • Unique class-A circuit optimized for guitars
  • Balanced line-level input with LED peak indicator & level control
  • Transformer isolated output to eliminate hum & buzz
  • 180° polarity reverse switch
  • Dual ground lift switch

Specifications for the Radial (R800 1028) Re-Amplifier

{ "Audio circuit type:" : "100% discrete class-A", "Frequency response:" : "20Hz ~ 15kHz (± 1.0dB)", "Dynamic range:" : "119dB", "Total harmonic distortion:" : "0.02% @ -15dBu", "Intermodulation Distortion:" : "0.02% @ -20dBu", "Input Impedance:" : "600Ω", "Noise:" : "OUT-1 -110dB; OUT-2 -108dBu", "Maximum Input:" : "+22dBu", "Features" : { "180° polarity reverse, Ground lift, Level Control" : "", "Input Connectors:" : "XLR", "Output Connectors:" : "1/4" Isolated and Direct" }, "General" : { "Construction:" : "14 gauge steel chassis & outer shell", "Size (L x W x D):" : "3.3" x 5.0" x 2" (84 x 127 x 48mm)", "Weight:" : "1.55lb (720g)", "Shipping size (L x W x D):" : "5" x 2.75" x 10.75" (127 x 70 x 273mm)", "Shipping weight:" : "2.6lb (1.18kg)", "Power:" : "+15VDC/400mA adapter included", "Conditions:" : "For use in dry locations only between 5°C and 40°C" } }

Read 0 reviews for the (R800 1028) Re-Amplifier - Activeq

Overall Rating:
Leave a review