Customer Reviews

800-562-6006
M-F 8am to 5pm PST

Turbosound iQ12 (IQ12)

2500 Watt 2 Way 12" Powered Loudspeaker

No reviews yet. Leave a review

Get More Value with CCI Solutions

UPS logo   Free UPS Shipping
Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
CCI Price
$889.00
Usually Ships
5 to 7 Days
Item Number 
TUR-IQ12
Vendor Part
IQ12

The 2,500-watt Turbosound iQ12 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes a 12" low frequency driver with a low mass voice coil for improved transient response and a high temperature 1" compression driver with copper-clad aluminum voice coil for extended high frequency reproduction.

Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ12 provides an impressive 2,500 watts of output power. A high degree of control over the loudspeaker system's performance is managed by a sophisticated but easy-to-use KLARK TEKNIKKLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, transparent limiting for the utmost clarity at high output levels, and long-term reliability. iQ12's advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry's most respected loudspeakers.

Turbosound iQ12 Features:

  • 10" low frequency driver with a low mass voice coil
  • High temperature 1" compression driver with copper-clad aluminum voice coil
  • KLARK TEKNIK Class-D power amplifier
  • 2500W output power
  • KLARK TEKNIK Digital Signal Processor (DSP)
  • Spatial Contour Control (SCC) DSP function for easy optimization of frequency response for physical speaker placement (stand, floor, wall, or ceiling)
  • Fully featured user interface on rear panel amplifier module with LCD display, Channel A & B gain controls, & single rotary encoder
  • 2 combination balanced XLR/jack inputs
  • Balanced XLR outputs for each independent channel
  • Mix out XLR connector
  • Mic/Line switch & level control with signal present LED on each channel
  • ULTRANET technology, so CAT5 cables can transmit pristine multi-channel audio signals & other info between ULTRANET-enabled products (eliminates RFI & crosstalk, common to analogue methods, & significantly reduces setup/installation time)
  • Onboard USB port provides access for remote control via PC computer & DSP & speaker modelling firmware updates
  • Lightweight fiber-glass-reinforced composite enclosure fitted with a rugged, powder-coated, perforated steel mesh grille & multiple internal rigging points for permanent installations
  • Dual angle pole mount socket
  • Neutrik powerCON connectors

Specifications for the Turbosound iQ12

{ "System" : { "Frequency Response" : "52 Hz – 18 kHz ±3 dB
45 Hz – 20 kHz -10 dB", "Nominal Dispersion" : "80° H x 60° V @ -6 dB points", "Maximum SPL" : "130 dB peak", "Crossover type" : "Active", "Transducers" : [ "1 x 12" (308.5 mm) LF driver", "1 x 1" (25.4 mm) HF compression driver" ], "Limiter" : "Independent HF, LF, peak and rms" }, "Amplifier" : { "Maximum output power*" : "2,500 W", "Type" : "Class-D", "Protection" : "Short circuit, open circuit, thermal" }, "Connectors" : { "Input A / B" : "2 x combo jack/XLR", "Sensitivity" : "Line +4 dBu, mic -22 dBu, switchable", "Input impedance" : "20 kO unbalanced, 40 kO balanced", "Maximum input level" : "+21 dBu", "Output A / B" : "2 x XLR Linked to input", "Mix output" : "XLR, balanced", "Output impedance" : "100 O unbalanced, 200 O balanced", "Ultranet input/link" : "2 x RJ45", "Mains Supply" : "Neutrik powerCON input 20A and link 15A" }, "Controls" : { "DSP" : "Rotary push-encoder Buttons for Process, Setup, Exit, Enter", "Mixer section" : [ "2 x gain controls (channels A and B)", "2 x Line/Mic switch" ] }, "User DSP Functions" : { "Factory EQ presets" : [ "Positioning, Sound mode", "Sound modeling, FBQ" ], "Display" : "LCD 128 x 32, blue backlit", "Delay" : "0 - 300 ms", "Equalisation" : "High and low shelving EQ
2 x parametric EQ", "Limiter" : "Zero attack input limiter", "Presets" : "20 total presets, 19 user-definable", "Crossover" : "High Pass L-R 24 dB/oct", "Protection" : "Lock-out function for all settings" }, "Ultranet Digital Network" : { "System" : { "Signal" : "16 channels", "Latency" : "< 0.9 ms" }, "Cabling" : { "Cables" : "Shielded CAT5", "Cable length" : "max. 246 ft / 75 m recommended" } }, "Power Supply" : { "Power consumption" : "150 W @ 1/8 max power", "Voltage (fuses)" : { "USA / Canada" : "120 V~, 60 Hz (T 15 A H 250 V)", "UK / Australia / Europe" : "220-240 V~, 50/60 Hz (T 10 A H 250 V)", "Korea / China" : "220-240 V~, 50/60 Hz (T 10 A H 250 V)", "Japan" : "100 V~, 50/60 Hz (T 15 A H 250 V)" } }, "Enclosure" : { "Dimensions (H x W x D)" : "609 x 370 x 370 mm (24.0 x 14.5 x 14.5")", "Net weight" : "14.7 kg (32 lbs)", "Construction" : "Injection-moulded polypropylene enclosure", "Finish" : "Black painted", "Grille" : "Powder coated perforated steel", "Flying hardware" : "M10 x 3 points" }, "Accessories" : "IQ12-WB Steel wall bracket" }

Read 0 reviews for the iQ12

Overall Rating:
N/A
Leave a review