Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

CAD Audio Microphone

CAD Audio has long been a trusted name in studio recording microphones. Their innovative designs range from old world vintage styled tube and ribbon mics to new low cost USB microphones. CAD is known for their sound quality and exclusive features.

Showing 1 - 20 of 32 Products

CAD CAD-GXL2200

CAD CAD-GXL2200 Microphone - Condenser Large diaphragm cardioid condenser microphone for recording, broadcast and sound reinforcement

CAD Audio Large diaphragm cardioid condenser microphone for recording, broadcast and sound reinforcement

    The GXL2200 by CAD Audio is a large diameter, fixed cardioid pattern, condenser microphone for recording, broadcast and sound reinforcement, including vocal and instrument applications. Microphone features a 1" gold vapor deposited diaphragm capsule and requires standard 48 Volt phantom power. Includes a removeable swivel mount that fits any 5/8" x 27 threaded microphone stand.

    Features

  • Externally biased true condenser
  • Unidirectional (cardioid) polar pattern
  • 30 Hz - 20 kHz frequency response
  • Less than 200 ohms impedance:
  • Less than 20dB (A-weighted) equivalent noise level
  • Matte black finish
  • Positive diaphragm pressure produces a positive voltage on pin 2 with respect to pin 3
  • Weighs 14.1 oz. (400 grams), Mic only
Read more
$149.00

List Price $209.00

Save 29% with CCI Solutions

CAD CAD-900

CAD CAD-900 ASTATIC Cardioid Condenser Microphone with flex gooseneck

CAD Audio 900 Microphone with Flex Gooseneck

    The CAD Audio 900 is a miniature low-noise, electret overhead cardioid condenser microphone for speech, vocal and choral pickup. It features 30" of cable permanently attached to flex gooseneck for easy positioning and adjustments when suspended. This flexible microphone can be purchased with your choice of a black or white finish.

    Features

  • Low-noise, electret condenser cardioid design
  • Cardioid pickup pattern
  • Wide, flat frequency response for natural, transparent sound quality
  • Externally housed electronics
  • Minimizes feedback when near sound reinforcement speakers/monitors-reduces pickup of unwanted off axis sounds
  • 3-pin male XLR connector, attached by a 30-foot cable, terminated with a mini 3-pin XLR
  • Durable black urethane paint finish (durable white urethane paint finish for the 900W)
  • Flexible PVC covering over gooseneck
  • .022" diameter hole behind mic head for monofilament lines for invisible mic positioning
Read more
$169.00

+ Free Shipping

List Price $239.00

Save 29% with CCI Solutions

CAD CAD-1700VP

CAD CAD-1700VP Choir Boom 56" choir mic, variable-pattern with low-profile boom and controller

BBE Sound 56" choir mic

    The CAD Audio 1700VP is a continuously variable pattern condenser microphone system with remote polar control (patent pending) featuring a feather light 56” boom and exclusive Clutch Rotation System. Remote control allows user to precisely adjust the shape of the pick-up pattern for best performance from a remote location. Utilizing a two-conductor shielded cable (maximum length 2,000 feet) between the microphone head and the pattern-control box (VPC-1), the user can adjust the polar pattern in real time without changing capsules, microphone positions, or inducing noise in the audio chain. This boom can be mounted on any standard microphone tripod or base stand.

    Features

  • Polar Pattern: Continuously-variable polar pattern
  • 40Hz - 20KHz frequency response
  • 29dBV (35mV) @ 1Pa sensitivity
  • 135 ohms impedance
  • 22dBA self-noise
  • 3-pin XLRM-type connector
  • Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3 at XLRM-type connector
  • Matte-black finish
  • RoHS Compliant
Read more
$599.00

List Price $859.00

Save 30% with CCI Solutions

CAD CAD-1600VP

CAD CAD-1600VP Microphone - Condenser

CAD Audio Continuously-variable pattern condenser microphone

    The CAD Audio 1600VP is a continuously-variable pattern condenser microphone for use when a suspended system is required. It includes a counter poise string, exclusive articulating steel hanger, anti-twist thread and rods, 30' of cable, and XLRF-type wall plate. The 1600VP is part of a miking system that utilizes a remote polar control (patent pending) with variable polar pattern for precise adjustments to shape of the pick-up pattern for best performance from a remote location. It uses a two-conductor shielded cable (maximum length 2,000 feet) between the microphone head and the pattern-control box (VPC-1), so user can adjust the polar pattern in real time without changing capsules, microphone positions, or inducing noise in the audio chain.

    Features:

  • Continuously-variable polar pattern
  • 40Hz - 20KHz frequency response
  • 135 ohms Impedance
  • 22dBA self noise
  • 3-pin XLRM-type connector
  • Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3 at XLRM-type connector
  • Matte-black finish
  • RoHS Compliant
Read more
$549.00

+ Free Shipping

List Price $789.00

Save 30% with CCI Solutions

CAD CAD-GXL1200

CAD CAD-GXL1200 Cardioid Studio Instrument Microphone

CAD GXL-1200 Cardiod Studio Instrument Mic

    The CAD Audio GXL1200 is a cardioid pattern condenser microphone packaged in a rugged, all metal housing with a transformerless design that provides low distortion and optimum low end frequency response. It's small size, accurate sound reproduction, and high SPL capability make this a great choice for miking overheads, high hats, cymbals, woodwinds and stringed instruments.

    Features

  • Externally Biased Condenser
  • Unidirectional (Cardioid) Polar Pattern
  • 30 Hz - 20 kHz Frequency Response
  • -56dB 0dB=1V/uBar @ 1kHz Sensitivity
  • Low (Less than 200 Ohms) Impedance
  • +14dB (A-weighted) Equivalent Noise Level
  • P24V or P48V Phantom Power
  • 3 pin XLR Connector
  • Positive pressure on diaphragm generates a positive voltage on pin
  • #2 relative to pin #3
  • Weighs only126 Grams
Read more
$99.00

+ Free Shipping

List Price $139.00

Save 29% with CCI Solutions

CAD CAD-STAGE7

CAD CAD-STAGE7 Drum Microphone - Package

CAD Audio drum mic for recording and live sound reinforcement

    The CAD Audio Stage7 drum mic pack is a seven-piece set for live performance and recording. Set includes: (1) D10 cardioid dynamic mic, (3) D29 dynamic tom mics with integrated clips, (1) D19 dynamic snare drum mic with integrated clip, and (2) C9 instrument condensers for high hats, cymbals or overheads. Stage7 pack also includes a vinyl carrying case with strap for easy transport and storage.

Read more
$229.00

+ Free Shipping

List Price $329.00

Save 30% with CCI Solutions

CAD CAD-STAGE4

CAD CAD-STAGE4 4-Piece Drum Microphone Pack for kick drum, floor toms, guitar cabinets, bass cabinets

CAD Audio Four-Piece Drum Microphone Pack

    The Stage 4 by CAD Audio is a four-piece drum microphone pack that includes (1) D10 cardioid dynamic mic, (2) D29 dynamic tom mics, with integrated clips, and (1) D19 dynamic snare drum mic, with integrated clip. Set includes a hard-shell transport/storage case.

    Features

  • (1) D10 Cardioid Dynamic Mic: D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It is designed to enhance “thump”, “crack” and “click”while reducing “boxiness”. Designed for kick drum, but is also great for floor toms, electric guitar and electric bass cabinets. Features die-cast metal body and hardened protective steel screen, plus integrated swivel mount.

  • (2) D29 Dynamic Tom Mics with Integrated Clips: The D29 is a cardioid, moving-coil dynamic microphone designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. Cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Can also be used on most electrical and acoustical instruments. The integrated drum clip facilitates fast and accurate mic placement.

  • D19 Dynamic Snare Drum Mic: The D19 is a supercardioid, moving-coil dynamic microphone designed for the capture and reinforcement of snare drum and other acoustic percussive instrument sound. The supercardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Can also be used with most electrical and acoustical instruments. Drum clip facilitates fast and accurate mic placement.
Read more
$129.00

List Price $179.00

Save 28% with CCI Solutions

CAD CAD-D38X3

CAD CAD-D38X3 Handheld Microphone

CAD Audio neodymium capsule, dynamic supercardioid polar pattern

    The CAD Audio D38 is a supercardioid dynamic handheld with a neodymium capsule. Durable and articulate, the D38 overachieves in most any live sound application, from lead vocals to spoken word announcements. Supplied in a 3-pack as the D38X3 with carry case and mic clips.

    Features:

  • Neodymium capsule design ensures a hot signal
  • Articulate performance for vocals
  • Durable all metal construction with carry case & clips
  • Pattern: Supercardioid
  • Principle: Dynamic moving coil motor
Read more
$69.00

List Price $99.00

Save 30% with CCI Solutions

CAD CAD-U9

CAD CAD-U9 USB Cardiod Condenser MiniMic for recording on the road

CAD Audio compact microphone solution, USB

    The CAD Audio U9 USB MiniMic is a compact microphone solution for recording on the road. It connects directly to a computer via it's USB port and features a 3.5mm (1/8") headphone jack for playback. The 180 degree swivel and cardioid capsule allow precise placement and maximum sound quality while Podcasting, Skyping, VoIP or recording music, while power LED indicates when mic is on and operational.

    Features

  • USB Connection
  • Miniature Profile
  • 1/8" Headphone Connection
  • Cardioid Polar Pattern
Read more
$39.00

List Price $49.00

Save 20% with CCI Solutions

CAD CAD-E100S

CAD CAD-E100S for vocals, percussions, acoustic instruments, multi-purpose

CAD Audio Mic with high sensitivity and low distortion

    The E100S by CAD Audio is a large diaphragm supercardioid condenser microphone that has the lowest noise floor in it's class (3.7 dBA) and the smooth, vintage tone and robust low end CAD is known for. The bootstrapped, full differential Quadra-FET™ front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures great performance. A nickel plated 1 inch capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by extended low frequency response. The The E100S includes an 80Hz hi-pass filter and a 10dB pad, vintage look cherry woodgrain case and stealth shock mount.

    Features

    *48V Phantom power is required.
  • Nickel plated 1" capsule provides full, rich tone with extended low frequency response
  • Proprietary circuitry and full differential Quadra-FET front end deliver high sensitivity and low distortion, making mic ideal for picking up high-volume sound sources
  • Extremely low noise floor of 3.7dBA for clean recordings
  • Supercardioid pickup pattern provides excellent off-axis noise rejection
  • 80Hz high pass filter to reduce low-end hum
  • -10dB pad increases headroom when recording loud sounds
  • Operates on standard 48V phantom power
  • Shock mount and vintage cherry woodgrain case included
Read more
$499.00

List Price $709.00

Save 30% with CCI Solutions

CAD CAD-TOURING7

CAD CAD-TOURING7 Premium 7-Piece Drum Microphone Pack for drums and percussive instruments

7-microphone pack in soft vinyl case

    The Touring7 by CAD Audio premium 7-piece drum microphone pack is an affordable, professional drum mic pack for superior sound reinforcement of drums and percussive instruments. Mics come packed in a soft vinyl carrying case.

    Features

  • (1) D12 Drum Mic: The D12 is a large-diaphragm, cardioid, moving-coil dynamic microphone designed and equalized for kick drum capture and reinforcement. Provides enhanced “thump”,“crack” and “click”while reducing “boxiness” Neodymium magnetics allow reduced coil mass for transient agility and impedance reduction. Mic can also be used on floor toms, electric guitar and electric bass cabinets. Features a die-cast metal body and hardened protective steel screen. An integrated swivel mount is included.

  • (4) TSM411 Tom Mics: TSM411 is a supercardioid, moving coil dynamic microphone designed for the capture and reinforcement of acoustic percussive instruments. The dual-point, polymer, capsule-suspension system and supercardioid polar pattern provide vibration isolation and off-axis rejection, crucial for on-stage clarity. Neodymium magnetics allow reduced coil mass for transient agility and impedance reduction. Can also be used with most electrical and acoustical instruments. Features a die-cast metal body and hardened protective steel screen. A shock-isolating swivel mount is included.

  • (2) GXL 1200 Mics for Cymbals or Over-Head Use: Packaged in a small, rugged, all metal housing, the GXL1200 Condenser microphone provides a transparent sound reproduction. Transformerless design allows for low distortion and optimum low end frequency response. The GXL1200's size, accurate sound reproduction, and high SPL capability, make it suitable for miking overheads, high hats, cymbals, woodwinds and stringed instruments.

Read more
$399.00

List Price $569.00

Save 30% with CCI Solutions

CAD CAD-D84

CAD CAD-D84 Large Diaphragm Condenser Microphone for true studio reproduction sound quality

CAD Audio side address large diaphragm condenser microphone

    The CAD Audio D84 is a large diaphragm condenser microphone that provides true studio reproduction delivering a rich, transparent, true-to-life sound with an internal shock mount for ease of placement.

    Features

  • Operating principle: externally-polarized
  • Large diaphragm condenser
  • Polar pattern: cardioid
  • Frequency response: 20Hz -20KHz
  • Sensitivity: -30dBV (30mV) @ 1 Pa
  • Impedance: 150 ohms
  • Max SPL: 138dB @ 1KHz
  • Self-noise: 19dBA
  • Power requirements: P48, 4mA
  • Weight: 8.3 oz [0.24Kg]
  • RoHS: compliant
Read more
$179.00

List Price $259.00

Save 31% with CCI Solutions

CAD CAD-C9S

CAD CAD-C9S Handheld Microphone

CAD Audio low-noise, electret condenser cardioid microphone

The CAD Audio C9 (matched pair) cardioid condenser microphone is designed primarily for overhead drum miking. The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Transformerless line-driver circuitry improves transient agility while maintaining phase alignment for clear detail. An integral polymer isolation mechanically decouples the capsule from the body minimizing acoustical conduction from the floor through the mic stand. The C9 is also perfect for use with classical stringed instruments, acoustic guitars, and folk instruments.

Features

  • (2) CAD C9 Cardioid Polar Pattern Mics
  • Frequency Response: 40Hz -13KHz
  • Sensitivity: (2.2mV) @ 1 Pa
  • Impedance: 150 ohms
  • RoHS: Compliant
  • High pass filter
  • Pad switches
  • Shock-isolating swivel mount
  • Read more
    $129.00

    List Price $179.00

    Save 28% with CCI Solutions

    CAD CAD-AS32

    CAD CAD-AS32 Acoustic-Sheild 32- Stand Mounted

    CAD Audio 16 gauge perforated stainless steel shield, mated to 53mm, high density, micro cell acoustic foam

      The CAD Audio's Acousti-shield 32 was developed as an accessory for the home recording professional and can substantially reduce unwanted reflections, echo flutter, and unwanted environmental acoustic interference. A trouble-free design results in an easy-to-use, highly flexible device without sacrificing stand mounted stability. It is constructed from high quality stainless steel mated to high density micro cell acoustic foam, features a heavy duty adjustable hinge, and includes mounting hardware to adapt to most microphones for easy, flexible placement.

      Features:

      • High quality 16-gauge perforated stainless steel shield mated to 53mm high density micro cell acoustic foam for a dry recording environment
      • Reduces reflections, echo, and unwanted environmental acoustic interference
      • Advanced mounting design for maximum positioning stability even when mated to an economy mic stand
      • Accommodates a variety of microphone designs & allows for creative control & a tailored acoustic result
      • Portable design for easy studio placement & simplified remote recording
      • Features a heavy duty adjustable hinge
    Read more
    $129.00

    List Price $179.00

    Save 28% with CCI Solutions

    CAD CAD-D90

    CAD CAD-D90 for lead vocal performance

    CAD Audio microphone with TrueFlex diaphragm

      The CAD Audio D90 supercardioid dynamic handheld microphone is engineered for smooth, articulate lead vocal performance. Mic features a Trueflex™ diaphragm and PowerGap™ high gauss neodymium magnets, creating a hot and articulate live performance vocal microphone.

      Features

    • TrueFlex™ diaphragm for articulate response
    • PowerGap™ Neodymium magnet for hot signal
    • Pattern: Supercardioid
    • Principle: Dynamic moving coil motor
    • Frequency Response : 50 - 16kHz
    • Sensitivity : -51.0 dBv (2.8mV) @ 1PA
    • Impedance : 500 Ohm
    • Max SPL >150dB
    • UPC : 631922107289
    • Weight : 1.5 lbs.
    • Dims : 10" X 6.5" X 3"
    Read more
    $99.00

    List Price $139.00

    Save 29% with CCI Solutions

    $15 Mail-In Rebate!

    CAD CAD-D80

    CAD CAD-D80 - Cardioid

    CAD Audio large diaphragm, moving coil, dynamic

      The CAD Audio D80 is a side address, large diaphragm, moving coil, dynamic microphone that delivers a reminiscent, yet updated sound profile. Features a tight, supercardioid polar pattern that supplies a hot output, ensuring outstanding performance on even the loudest stages.

      Features

    • Operating principle: moving coil dynamic
    • Polar pattern: supercardioid
    • Frequency response: 50Hz -15KHz
    • Sensitivity: -48dBV (4.0mV) @ 1 Pa
    • Impedance: 370 ohms
    Read more
    $99.00

    List Price $139.00

    Save 29% with CCI Solutions

    $10 Mail-In Rebate!

    CAD CAD-D89

    CAD CAD-D89 for drums, guitar cabs, brass & strings

    CAD Audio TrueFlex diaphragm for articulate response

      The CAD Audio D89 supercardioid dynamic instrument mic is outfitted with a Trueflex™ diaphragm and PowerGap™ high gauss Neodymium magnets, creating a hot and articulate live performance instrument microphone perfect for drums, guitar cabs, brass & strings.

      Features

    • TrueFlex™ diaphragm for articulate response
    • PowerGap™ Neodymium magnet for hot signal
    • Pattern: Supercardioid
    • Principle: Dynamic moving coil motor
    • Frequency Response : 50 - 17kHz
    • Sensitivity : -50 dBv (2.8mV) @ 1Pa
    • Impedance : 520 ohms
    • Max SPL >150dB
    • UPC : 631922107272
    • Weight : 1.5 lbs.
    • Dims : 10" X 6.5" X 3"
    Read more
    $89.00

    List Price $129.00

    Save 31% with CCI Solutions

    CAD CAD-TSM411

    CAD CAD-TSM411 Supercardioid Dynamic Snare Microphone for snare drum, rack toms, percussion, electric/acoustic instruments

    CAD Audio Moving Coil Supercardioid Dynamic Microphone

      The TSM411 by CAD Audio is a supercardioid, moving-coil dynamic microphone designed for the capture and reinforcement of acoustic percussive instruments. The dual-point, polymer, capsule-suspension system and supercardioid polar pattern provide vibration isolation and off-axis rejection crucial for on-stage clarity. Neodymium magnetics allow reduced coil mass for transient agility and impedance reduction. Can be used on most electrical and acoustical instruments. Features die-cast metal body and hardened protective steel screen. A shock-isolating swivel mount is included.

      Features

    • Operating Principal: Moving Coil Dynamic
    • Polar Pattern: Supercardioid
    • Frequency Response: 100Hz -15KHz
    • Sensitivity: -56dBV (1.6mV) @ 1 Pa
    • Impedance: 310 ohms
    • Weight: 7.9oz [0.23Kg]
    • Supercardioid polar pattern for focused pickup & minimial off-axis noise
    • Ultra-sensitive neodymium element provides accurate sound reproduction
    • Rugged die-cast zinc alloy housing
    Read more
    $79.00

    List Price $109.00

    Save 28% with CCI Solutions

    CAD CAD-U37

    CAD CAD-U37 USB Cardioid Condenser Microphone for broadcast, TV and recording studios, side-address design, (champagne)

    CAD Audio large diaphragm condenser microphone

      The CAD Audio U37 is a condenser studio capsule, cardioid polar pattern microphone featuring a side-address design for studio quality recording, directly to a computer. It has a -10dB overload-protection switch to minimize distortion from loud sound sources and bass reduction switch to reduce room noise. The Mic is PC/Macintosh compatible and includes a tripod stand, plus 10’ USB cable.

      Features

    • Cardioid pick-up pattern minimizes background noise and isolates main sound source
    • -10dB overload-protection switch minimizes distortion from loud sound sources
    • Bass-reduction switch reduces room noise
    • Side-address design popular with broadcast, TV and recording studios
    • Ten-foot USB cable
    • Frequency Response : 20Hz - 20kHz
    • Sensitivity : -40dBV @ 1Pa
    • Encoding : 16 bit resolution, 48K sampling rate
    • PAD : -10dB
    • Roll Off : Reduce Proximity Effect
    • Weight : 2 lbs
    Read more
    $69.00

    List Price $99.00

    Save 30% with CCI Solutions

    CAD WXHW Hypercardioid Condenser Headworn Microphone

    CAD WXHW Hypercardioid Condenser Headworn Microphone Hypercardioid Condenser Headworn Microphone for CAD Audio Wireless - TA4F Connector, (black)

    Wireless CAD Audio Compatible Cardioid Microphone

      The WXHW by CAD Audio is a wireless headworn hyper-cardioid condenser microphone with CAD TA4F connector that is compatible with all CAD Audio wireless systems. It Includes a 52" length cable. *Microphone is designed for use with CAD's StagePass WX1210HW wireless system.

      Features

    • Hypercardioid polar pattern
    • 52" cable
    • TA4F connector
    • Designed for use with WX1210HW wireless system
    Read more
    $59.00

    List Price $79.00

    Save 25% with CCI Solutions