Mic Stand Clips, Adapters & Booms

Easily hold six handheld microphones on a single microphone stand using the Ace Backstage Softpod microphone holder! It easily attaches to most any standard microphone stand via its threaded, sturdy black metal base, and its soft foam isolates and cushions microphones once they are set in their spots. Plus, the foam minimizes extra noise from microphones while placing or removing them from the Softpod. You can even mix wired and wireless microphones together on the Softpod, making it an incredibly handy tool for any multi-microphone stage setup!

Features:

• Handy enough and small enough to bring along to all your performances, productions, and events
• Mounts on most standard microphone stands
• Quick and easy setup
• Easily holds up to 6 handheld microphones at one time
• Durable, 16 gauge steel base with black zinc-coated finish ensures long life

Audio Technica's AT-8419 lavalier microphone clip

Note: Fits Audio-Technica case style: M1

The Audio-Technica AT8420 lavalier microphone clip (black) is designed for use with Audio-Technica case style M7.

Audio Technica's AT8428 Slip-in microphone clamp fits a number of particular Audio-Technica case styles: T1, T2, T3, T4, T5, T6, T7

This Audio-Technica AT-8444 mounts a small diameter (10 mm) microphone to an acoustic guitar. Fits Audio-Technica case style: M1.

Audio-Technica's AT8456a Quiet-Flex™ stand clamp is designed for A-T handheld wireless transmitters at 5/8"-27 threads.

Features

• Quiet-Flex mic stand clamp for AT handhelds
• 5/8"-27 threads

The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality transformer solves the problem of excessive high-frequency loss and hum pickup.

Features

• Matches low-impedance mics to high-impedance electronic inputs
• Permits use of long mic cables
• Maintains high frequency response
• Reduces noise pickup

The Audio-Technica CP8306 is a transformer balanced adpater cable to use PRO 88W receiver with XLR-type balanced microphone inputs.

The Atlas Sound AD-6B Adapter is designed for 7/8" female to 7/8"- 27 female coupling; It is chrome plated with a 2 oz (Net Weight).

Features

• Durable design for use in touring P.A. applications
• Quality craftsmanship assures compatibility & long-lasting performance
• U. S. standard 5/8"-27 termination accommodates all types of microphone holders

The Atlas Sound TM-1E twin microphone mount provides the ability to mount two or three microphones onto a standard 5/8"-27 threaded microphone stand, gooseneck, or stand adapter. It comes 8-3/4" wide and features an ebony finish and is a great accessory for stereo, XY, or overhead miking applications.

Atlas Sound TM-1E Features:

• Dual/Triple mic mounting adapter
• Perfect for XY or stereo mic placement
• Works well for overhead sound pickup in live sound or recording applications

The Atlas Sound GN13E Flexible 13” Goosneck attaches to any microphone stand or adapter with 5/8”-27 male and female threads. Inside diameter is .338”. With a black finish this attachment creates a sturdy, bendable yet firm, section of the mic stand for easy and precise microphone placement.

Features

• Attach to Any Mic Stand or Adapter with 5/8"-27 Treads
• Available in Chrome or Ebony

Atlas Sound's PB21XCH is an extendable boom arm with a chrome finish and two pound counterweight that's designed to attach to any standard microphone stand and add a boom that extends from 25-1/4" to 38-1/2" with a single motion. This boom arm is a great add-on for miking a wide variety of sources that might be hard to reach otherwise. Plus, with its fixed counterweight, you don't have to worry about the boom arm sagging under the weight of a large microphone!

Features:

• Telescoping boom arm extends from 25-1/4" to 38-1/2"
• Boom extends with a single motion
• Suitable for a wide variety of miking applications
• Fixed 2 lb. counterweight for stability
• Chrome finish

The CabGrabber™ (CABGRAB1) is a tensionfit microphone holder that clamps on to most combo amps or cabinets between 8"-14" in depth. Can be used with any microphone weighing up to 16 oz.

.

Features

• Precise positioning
• Simple, elegant, compact and easy to use
• No tools required
• Adjustable, tension held
• Mic arm hand tightens firmly into position
• Holds mics weighing up to 1 pound (.45 Kilos)
• Works on cabinets with flat or recessed edge
• Clamps to side or top of cabinet
• Durable steel construction

The AEMWCLIPB Standard Tie Clip (White & Black) Includes one white and one black, lightweight plastic clip great for keeping micophone wires tight. May be colored for custom matching.

The DPA DMM0519 pack of 5 headset cable collar clips is designed for use with the d:fine headset microphones.

The DPA VC4099 violin mounting clip is designed to mount the DPA 4099 onto violins, mandolins, banjos, and many other stinged instruments.

The Hosa MHR-122 is a universal microphone clip. The spring loaded "butterfly clip" design accommodates microphones with various diameters. This microphone clip is designed to hold a dynamic microphone. It is ideal for use in touring and other live-sound applications.

Featurews:

• Durability to withstand drops, bumps, and other live-sound hazards
• Spring-clip accommodates a wide range of wired and wireless microphones
• US and EU threads to accommodate most microphone stands

16080

• Features soft rubber support with room for two headphones.
• Keeps everything neat and tidy, no more tangled cords or dropped equipment.
• Slot in the front is handy to hold two in-ear monitors.
• Clamp-on holder attaches to a music or mic stand (maximum diameter of 1.18")

The K&M 19745 Smartphone Holder is suitable for flat devices such as smartphones or MP3 players with a width of 1.81 to 2.99" (45.97 to 75.94mm). It is quick and easy to use, and you need to simply place the smartphone in the holder and close the clamping jaws. The device is released at the press of a button. The clamping jaws, with integrated moss rubber protectors, ensure a strong grip and eliminate undesired vibration sound problems. The bars of the holder can be removed and re-inserted on the reverse side of the holder to ensure that the functioning of the operating controls is not affected. Also, this holder can be switched between portrait and landscape format.

Features:

• Designed to be attached to tubes up to 1.18" (29.97mm) in diameter
• Also suitable for tablets in cases or protective covers
• Adjustable clamping jaws ensure unhindered access to the interfaces and the operating elements on the device
• It is designed to freely rotate 90°
• Alternatively, it can be screwed on to 3/8" (9.5mm) thread connectors