Talk to an expert
M-F 7am to 5pm PST
800-562-6006
info@ccisolutions.com

Phono Preamps

Showing 1 - 7 of 7 Products

ART DJPRE II

ART DJPRE II 

Phono Preamplifier

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.

Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

ART DJPRE II Features:
  • High accuracy/low noise preamp
  • Switchable low cut rumble filter
  • Variable preamp gain
  • Signal present/clip indicator
  • Selectable cartridge loading
  • RCA preamp outputs
  • Heavy duty extruded chassis
  • Designed and developed in the USA
Read more
$49.00

List Price $65.00

Save 25% with CCI Solutions

ART USB Phono Plus

ART USB Phono Plus 

Phono Preamp with USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and noise) guarantee pristine audio capture.

Front mounted gain control and Signal/Clip LED allows easy optimization of a wide range of analog input sources. The USB Monitor/headphone provides zero latency monitoring of the input source for easy cueing. The USB PhonoPlusPS can also act as audio playback source for any USB equipped computer or laptop. Optical TOSLINK Input and Output as well as an S/PDIF Input make the USB PhonoPlusPS an ideal analog / digital audio to USB interface as well.

The built-in low noise Phono Preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line Out jacks are always connected to the input preamp signal for source monitoring or to allow use as a stand-alone phono preamp.

Housed in an all aluminum black anodized case, the USB PhonoPlusPS can be powered by either external power supply or directly via USB port. To ensure maximum versatility, the USB PhonoPlusPS is fully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with Windows 98SE/ME/2000/XP/Vista/7 USB audio device drivers as well as Apple OS9.1/OS-X computers with native USB support.

USB PhonoPlusPS ships with SoundSaver Express software.

ART USB Phono Plus Features:
  • USB Connectivity to Desktop and Laptop Computers
  • RIAA Accurate Low Noise Phono Preamp
  • Up to 45 dB of Clean Gain
  • Latency Free Monitoring
  • S/PDIF or optical to USB and USB to Optical Interfaces Included
  • Preamp Line Out Allows Use as a Stand-alone Phono Preamp
  • Includes Recording & Production Software
  • Compact, Stackable all Aluminum Chassis
  • Flexible Power from USB or External Power Supply
  • Three Year Warranty
Read more
$79.00

List Price $99.00

Save 20% with CCI Solutions

Behringer PP400 Ultra-Compact Phono Preamp

Behringer PP400 Ultra-Compact Phono Preamp with dedicated RCA and1/4" TRS output connectors

ultra-compact phono-signal converter

The PP400 phone pre-amp is ultra-compact and features stereo RCA Inputs and Outputs, as well as a ¼ " TRS Output jack. Unit has incredible low-noise operation so vinyl records deliver sound exactly as they are read from a turntable’s needle. A 12 V adapter is included.

Features:

  • Converts your phono signal to a line level signal
  • Phono preamp to accommodate all magnetic pickups
  • Dedicated RCA and1/4" TRS output connectors
  • DC 12 V adapter included
  • 3-year warranty program
  • Read more
    $24.99

    List Price $37.99

    Save 34% with CCI Solutions

    Radial (R800 1300) Direct Box

    Radial (R800 1300) Direct Box (Black)

    Turntable

    The Radial Engineering J33 is a combination phono preamplifier and purpose built stereo direct box made to handle the rigors of the professional recording studio and the abusive environment of live touring. Designed specifically for dynamic cartridges, the J33 begins with a low noise front end. Inputs are standard RCA with the required turntable ground lug. A second set of direct box XLR outputs deliver a mic level signal to feed a concert snake, mic splitter and mixing desk preamp inputs. A rumble filter is also available for high sound pressure environments to reduce bothersome resonant feedback. As with all Radial DIs, the J33 features a 14 gauge steel enclosure with a unique book-end design that creates a protective zone around the switches and connectors.

    Features:

    • Combination RIAA Phono preamp and DI box
    • Stereo RCA, ¼" TRS, 3.5mm and XLR outputs
    • Built -in low frequency rumble filter
    • Choice of 48V phantom or DC supply
    Read more
    $199.99

    List Price $220.00

    Save 9% with CCI Solutions

    Radio Design Labs EZ-PH1

    Radio Design Labs EZ-PH1 

    Stereo Phono Preamplifier

    The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering. Stereo RCA jacks and a grounding screw are provided on the rear panel for connecting a turntable tone arm. The input is preamplified with RIAA equalization to feed the line output RCA jacks. Left and right channel front-panel LED VU metering facilitates adjustment of the level trimmers. The EZ-PH1 is ideal to add phono inputs to mixers and amplifiers with line inputs, or for direct connection to recording decks for dubbing records onto other media. It is used in clubs, educational facilities and studios.

    RDL EZ-PH1 Features:
    • Phono Input on Gold-Plated RCA Jacks
    • Line Output on Gold-Plated RCA Jacks
    • Front-Panel GAIN Trimmer for Each Channel
    • Dual-LED VU Meter for Each Channel
    • RIAA Equalization
    • Turntable Grounding Screw Provided
    Advantages:
    • Gold-Plated Connectors
    • Adapt Turntable to an Amplifier Line Input
    • Feed a Turntable into a CD Recorder
    Read more
    $128.75

    List Price $143.04

    Save 10% with CCI Solutions

    Radio Design Labs ST-PH1

    Radio Design Labs ST-PH1 

    Stereo Phono Preamplifier

    The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.

    RDL's SupplyFlex power input configuration is included in the ST-PH1. The power supply input may be fed from a floating (not ground-referenced) 24 Vdc power source, from a bipolar power supply (+/- 12 Vdc or +/-15 Vdc) or from a ground-referenced 24 Vdc power supply.

    Although phono inputs are provided on some equipment, optimum system performance is obtained when phonographs are preamplified as close to the turntable as possible, and then the line-level signals are fed to the next equipment in the chain. The convenience of the ST-PH1 is ideal for all such applications.

    RDL ST-PH1 Features:
    • Stereo or Mono Phono Preamplifier
    • Balanced or Unbalanced Outputs
    • Outputs Drive Hi or Low Impedance Lines
    • Accurate, Low-Noise Preamplification
    • Adjustable Left and Right Output Levels
    • RDL® SupplyFlex™ Power Input Configuration
    Read more
    $173.63

    + Free Shipping

    List Price $192.90

    Save 10% with CCI Solutions

    Shure RPM626 In-Line Preamp

    Shure RPM626 In-Line Preamp (Black)

    The Shure RPM626 in-line microphone preamplifier acts to boost the signal it receives from the microphone (mic level signals are the lowest/weakest audio signals) to a level suitable for line-level input. This mic preamp is suitable for SM35, WBH53, Beta 53, Beta 91, Beta 98, MC50B, and MC51B microphones.

    Features:

    • In-line mic preamp
    • Boosts mic-level signals to line-level
    • Works with SM35, WBH53, Beta 53, Beta 91, Beta 98, MC50B, & MC51B mics
    Read more
    $90.00