Talk to an expert
M-F 8am to 5pm PST
800-562-6006
info@ccisolutions.com

Bose L1 Model 1S Portable Line Array PA System (359372-0010)

with dual woofer bass module 5.25"

What's in the box:

  • Bose L1 Model 1S with B1 Bass Portable Line Array PA Speaker System
  • L1 Model 1S power stand and cord
  • L1 Model 1S top array and bottom extension
  • Loudspeaker carrying bag
  • Power stand carry bag
  • B1 bass module and cable
  • B1 slip cover

Video:

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
$2,486.00
Save 28%
−$687.00
Advertised Price
$1,799.00
Clearance Savings!
−$270.00
Clearance Price!
$1,529.00
Availability
SOLD OUT!
Usually Ships
1 to 2 Days
Item Number 
BSE-L1MIS-SB1
Vendor Part
359372-0010

with B1 Bass Module

Bose L1® Model 1S with B1 Bass ModuleThe L1 Model 1S portable line array system delivers a potent combination of portability and performance. It's compact and light enough to make setup easy, yet powerful enough to fill mid-sized venues. Includes one B1 bass module for enhanced low-end performance. Vertical configuration of system's small, closely spaced drivers allow forward sound projection, and to the sides-delivering 180-degree coverage-with little up and down, reducing unwanted reverberation to produce consistent tonal balance as sound spreads more evenly across the stage and into the audience, while volume level drops off more slowly than with conventional speakers. Unique Bose® technologies enable system to serve as both PA and monitor and can be positioned behind or to the side of performer, eliminating the need for conventional monitors, mixers and PA systems.

Features:

  • Spatial Dispersion™and Articulated Array® speaker technologies in the loudspeaker produce wide, uniform sound coverage.
  • 12 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure-creating nearly 180 degrees of horizontal coverage and consistent tonal balance.
  • Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model 1S system with up to two B1 bass modules or one B2 bass module.
  • ToneMatch® port is built into power stand for digital audio and power connection to ToneMatch audio engine.
  • Analog input, trim control and signal/clip LED for line-level analog input via ¼" TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems.
  • Bass module out for amplified bass output signal to the bass module. L1 system automatically adjusts equalization appropriately when bass modules are connected.
  • Interlocking design of lightweight components eliminates need for speaker stands and speaker wires. Setup takes only minutes.
  • Retractable legs provide stability for streamlined power stands and loudspeakers. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport.
  • Convenient carry bags-one each for the loudspeaker, power stand and bass module.

Specifications for the Bose L1 Model 1S Portable Line Array PA System

{ "System Performance" : { "System Type" : "Self powered, two-way", "Frequency Response (±3 dB)" : "40 Hz - 12 kHz", "Frequency Response (-10 dB)" : "32 Hz - 14 kHz", "Nominal Dispersion" : "195° H x 10° V", "Maximum SPL @ 1 sq. m" : "112 dB SPL (118 dB SPL peak)", "Crossover Frequency" : "200 Hz (24 dB\/Octave)" }, "Amplification" : { "System Power Rating" : "375 W", "Low Frequency Amplifier" : "250 W", "High-Frequency Amplifier" : "125 W", "Distortion at Rated Power" : "0.1% Max (30 Hz - 15 kHz)", "System Limiter" : "Dynamic limiter", "Overload Protection" : "Fuse\/MOV\/NTC\/PTC", "Power Indicator" : { "Blue LED" : "System on", "Red LED" : "Fault" } }, "Transducers" : { "Driver Complement" : { "Array" : "Twelve (12) 2.25" (57 mm) HF drivers", "B1 Bass Module" : "Two (2) 5.25" (133 mm) LF Drivers (8 Ω)" } }, "Channel" : { "Signal Indicators" : { "Analog Signal\/clip LED" : [ "Green = Signal present", "Yellow = -3 dB below clip", "Red = Clip (limiter active)" ] } }, "Trim" : "+14 dB @ max", "Input" : "1\/4" TS unbalanced or TRS balanced", "Channel Gain (1\/4" Input)" : "-50 dB to +28 dB (line)", "Maximum Input Signal" : "+24 dBu (balanced)", "Input Impedance" : "10 kΩ ±10% (unbalanced)", "Additional Connections" : { "Bass Module Out (for B1 or B2 only)" : "NL4 connector (all pins wired, two for auto sensing). Bass output signal for driving up to two B1 bass modules (1 B1 = 8 Ω, 2 B1 = 4 Ω) or one B2 bass module (B2 = 4 Ω)", "ToneMatch Port" : "CAT5 Ethernet cable with RJ45 conneciton providing digital audio and power connection for the optional T1 ToneMatch audio engine", "AC Mains" : "IEC Connector" }, "Physical" : { "Enclosure" : { "Power Stand" : "Polypropylene cover with cast aluminum legs and steel chassis base", "Extension and Array" : "Aluminum enclosuer with ABS baffle" } }, "Grille" : "Powder-coated perforated steel grille", "Dimensions (Enclosure only)" : "Assembled Height 79.4" (2018 mm)", "Net Weight" : { "Top Array and bottom extension" : "25 lbs (11.3 kg)", "Power Stand" : "23.7 lbs (10.7 kg)", "B1 Bass Module" : "26.6 lbs (12.1 kg)" }, "Shipping Weight" : { "Top Array and bottom extension" : "32.25 lbs (14.6 kg)", "Power Stand" : "32.0 lbs (14.5 kg)", "B1 Bass Module" : "30.0 lbs (13.6 kg)" }, "Voltages" : { "US\/Canada" : "100 - 120 V, 50\/60 Hz 500 W", "Europe" : "220 - 240 V, 50\/60 Hz 500 W" } }