Customer Reviews

800-562-6006
WE'RE OPEN! M-F 8am to 5pm PST

Furman CN-20MP Sequencing Remote

20A Remote Duplex EVS Smart Sequencing 10 Feet Cord

No reviews yet. Leave a review

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price

Call for Details!

Usually Ships
In Stock -Same Day
Item Number 
FUR-CN20MP
Vendor Part

Delivering SmartSequencing outside of the equipment rack, with remote relay!

Furman's Contractor Series MiniPorts - such as this CN-20MP - extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. DIP switches and potentiometer allow customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches. Sequencing of duplex initiated remotely by standard analog triggering or digital link.

Features:

  • SmartSequencing for flexible controlling options
  • DIP switches and potentiometer for customizing settings
  • Security covers for preventing tampering
  • Remote initiation of duplex sequencing - by analog or digital
  • Automatic shut off when triggered by fire alarm

Specifications for the Furman CN-20MP Sequencing Remote

{ "General" : { "Family" : "Contractor Series", "Line Voltage" : "120 (Volts) ", "BlueBOLT Enabled" : "No" }, "AC Protection" : { "Automatic Voltage Shutoff" : "No" }, "Shipping Info" : { "Length" : "11.7 (Inches) ", "Width" : "9.2 (Inches) ", "Height" : "4.6 (Inches) ", "Weight" : "5.4 (Lbs) ", "Unit of Measure" : "Each", "UPC" : "654061028482", "Master Pack Qty" : "6" }, "Other Specifications" : { "AC Voltage Input Range " : "90-139VAC, 50/60Hz", "Maximum AC Current Rating " : "20 Amps (No Breaker)", "AC Cord " : "3/12AWG, 10 feet, black, fixed, NEMA 5-20P plug", "AC Receptacles" : "2 NEMA 5-20R's (1 duplex)", "AC Undervoltage Protection" : "EVS, 77VAC+/-3VAC", "AC Overvoltage Protection" : "EVS, 140VAC+/-5VAC", "AC Overvoltage Reset Modes" : "Enabled and disabled (configurable via DIP Switch #9)", "Operating Temperature Range " : "5C (40F) to 40C (105F) degrees", "Humidity Range " : "<90% rH (Relative Humidity)", "Circuit Breaker" : "No Breaker", "Front panel diagnostic indicators (LED)" : "Power, Extreme Voltage, Primary Link, Secondary Link", "Side Panel DIP Switch Features (with security cover)" : [ "1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual", "Side Panel Potentiometer allows fine tune delay adjustments" ], "Remote Terminal" : [ " +5-30VDC In, 12VDC (12mA) Out", " Phoenix-type 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY_OUT (Class 1 Wiring)" ], "SmartSequencing" : "Phoenix-type 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000' nominal)", "Force Off" : "Phoenix-type 2-Pin Connector With Screw Terminals, FORCE OFF (Class 1 Wiring)", "RS-232 Compatible" : "Yes, indirectly, when connected via SmartSequencing to a Furman Smart Sequencer with an RS-232 port", "IP Accessibility" : "Optional IP control via Telnet, HTTP, or BlueBOLT® when used in conjunction with SmartSequencing", "Voltmeter" : "Available with SmartSequencing Ethernet option, ± 2VAC accuracy", "Ammeter" : "Available with SmartSequencing Ethernet option, ±1A accuracy", "Power Consumption (No Load)" : "10 Watts", "Safety Agency" : "CSA, RoHS Compliant" } }

Read 0 reviews for the CN-20MP Sequencing Remote

Overall Rating:
N/A
Leave a review