800-562-6006

Listen Technologies LT-800 Stationary RF Transmitter (72 MHz)

57 Selectable Channels - Look & Listen (TM) LCD display - Built-in Auto Processor

No reviews yet. Leave a review

What's in the box:

  • Listen Technologies Stationary RF Transmitter Package (72 MHz)
  • LA-207 Power Supply for LT-800
  • Line Cord
  • LA-106 Telescoping Top Mounted Antenna (72 MHz)
  • LA-304 Assistive Listening Notification Signage Kit
  • Limited Lifetime Warranty

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
$846.00
Save 11%
−$97.00
CCI Price
$749.00
Usually Ships
3 to 5 Days
Item Number 
LIS-LT-800-072
Vendor Part

Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, broadcasting a high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker / receivers. The end result - your audience can hear and understand the presentation better because of improved speaker placement or because they have their own belt pack and headset. The signature Look & Listen™ LCD shows channel, lock, programming and RF power.

Features:

  • Look & Listen (TM) LCD display for quick channel, programming, and channel lock status information
  • Balanced and unbalanced audio inputs allow for use with any audio source
  • Built-in auto processor optimizes audio (voice or music) prior to transmission
  • 57 available, selectable channels
  • VU level meter and test tone for simple installation and set up
  • 30-day, no-obligation demonstration available for your venue or business
  • Backed by Listen Technologies' limited lifetime warranty and hassle-free support

Specifications for the Listen Technologies LT-800

{ "Audio" : { "Frequency Response" : "50 Hz - 15 kHz (±3 dB)", "Signal-to-Noise Ratio" : "SQ enabled 80 dB, SQ disabled 60 dB", "Audio Input 1" : [ "Rear panel", "one (1) Female XLR or 1/4 in combo connector", "balanced", "0 / -55 dBu (line/mic) nominal input level adjustable", "-30 / +21 dBu (line/mic) maximum input level", "impedance 20k / 1k ohm (line/mic), phantom power +12 VDC" ], "Audio Input 2" : [ "Rear panel", "two (2) phono connectors", "unbalanced", "-10 / +10 dBu nominal input level adjustable", "+30 dBu maximum, impedance 100k ohm" ], "Audio Processing" : "Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1", "Contour" : "Cuts and boosts frequencies above 5 kHz", "Distortion" : "< 2% total harmonic distortion (THD) at 80% deviation", "Audio Output" : [ "Input 1 and input 2", "mixed output (rear panel)", "two (2) phono connectors", "unbalanced", "-10 dBu nominal output level", "+15 dBu maximum, impedance 10 ohm" ], "Headphone Output" : [ "Front panel", "one (1) 3.5 mm (0.14 in.) stereo connector", "unbalanced", "adjustable output level", "+3 dBu maximum", "impedance 10 ohm" ] }, "Controls" : { "User Controls" : { "Front Panel" : "Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume control", "Rear Panel" : "Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)" }, "Internal Adjustments" : "Compression ratio for audio processor", "Programming" : "SQ on/off, process on/off, channel lock" }, "Indicators" : { "LCD" : "Channel designation, lock status, RF power level, programming (front panel)", "Audio Input Status LEDs" : "Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)", "Processing" : "Indicated by a green LED when on (front panel)", "Test Tone" : "Red LED illuminates when test tone is enabled.", "RF Power" : "Indicated on the LCD (low, mid, high)" }, "RF" : { "Frequency Range" : "72.025 - 75.950 MHz", "Number of Channels" : "17 wide band, 40 narrow band", "Frequency Accuracy" : "± .005% stability +32° to +122 °F (0° to +50 °C)", "Antenna Type" : "Various antennas available", "Transmitter Stability" : "50 PPM", "Transmission Range" : "Up to 305 m (1,000 ft.)", "Antenna Connector" : "BNC", "Output Power" : "80,000 uV at 3 m", "Number of Simultaneous Transmitters" : "6" }, "Power" : { "Power Supply" : "In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)", "Power Supply Input" : "100-240 VAC, 50-60 Hz, 0.4 A", "Power Supply Output" : "12 VDC, 1.3 A, 15.6 W", "Power Supply Connector" : "0.02 in (5.0 mm) OD, 0.01 in. (2.5 mm) ID, barrel type", "Compliance" : "UL, CE, GS, TÜV, RoHS" }, "Physical" : { "Width" : "21.5 cm (8.50 in.)", "Height" : "4.5 cm (1.75 in.)", "Depth" : "23 cm (9.13 in.)", "Color" : "Dark Grey with white silk screening", "Unit Weight with Power Supply" : "1.6 kg (3.5 lbs.)", "Shipping Weight" : "2.7 kg (6.0 lbs.)", "Rack Mounting" : "One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)", "Weight" : "1.2 kg (2.6 lbs.)" }, "Environmental" : { "Temperature - Operation" : "-10 °C (14 °F) to +40 °C (104 °F)", "Temperature - Storage" : "-20 °C (-4 °F) to +50 °C (122 °F)", "Relative Humidity" : "0 to 95% relative humidity, non condensing" }, "Compliance" : { "Safety" : "RoHS", "RF" : "FCC Part 15, Part 90, Industry Canada" } }

Research Materials for Listen Technologies's LT-800 (LIS-LT-800-072)

We've added technical materials to help with your buying decision. Even if you're technically inclined, you may want to consider talking to our sales techs to make sure this item is the right fit for your particular use. 800.562.6006

Remember to ask for the lowest available price.

Listen EVERYWHERE Drive-In Worship Brochure

LT-800 (LIS-LT-800-072) Specifications

LT-800 (LIS-LT-800-072) User Guide

LT-800 (LIS-LT-800-072) Quick Reference Card

Read 0 reviews for the LT-800 Stationary RF Transmitter (72 MHz)

Overall Rating:
N/A
Leave a review