Talk to an expert
M-F 8am to 5pm PST
800-562-6006
info@ccisolutions.com

Yamaha Rio3224-D Rackmount Stagebox (RIO3224-D.) - Digital

32-Input x 16-Output R Series Dante

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price

Availability
Ships directly to you from Yamaha
Usually Ships
2 to 3 Days
Item Number 
YAM-RIO3224-D
Vendor Part
RIO3224-D.

The Rio3224-D model is the flagship of the R Series and comes equipped with 32 locking XLR inputs, 16 XLR outputs, four AES/EBU outputs, and two Dante network connections. In the past, when you wanted to expand the audio I/O on your stage to accommodate more performers or to provide a more robust microphone setup, you usually had to deal with analog audio snakes with bulky, multi-cable connections and limited channel counts. Yamaha's R Series I/O racks take full advantage of Dante networking to provide exceptional flexibility and freedom in setup and placement while still offering natural, musical sound output while only needing to use a single Ethernet cable to connect between your console and stage box.

Features:

  • Sonic performance that brings out the best in any system
  • Dante network protocol contributes to greater system scalability and flexibility
  • Support for CL series consoles as well as other Dante based systems
  • Automatic digital-stage compensation for analog gain changes (CL series only)
  • Four models flexibly accommodate any system requirements

Specifications for the Yamaha Rio3224-D Rackmount Stagebox

{ "Sound Philosophy" : "Natural Sound Concept", "Grade" : "Inherit the sublime sound of the PM series", "Sampling Rate" : "44.1, 48, 88.2, 96 kHz", "Indicators" : "Signal, Peak, +48 V", "Gain Compensation" : "Supported", "HA Control Redundancy from CL/QL Consoles" : "Supported", "Controllability from R Remote Software" : "Supported", "Maximum Number of Units Using HA Remotes Per System" : "Up to 8", "AD8HR Mode (HA Control from M7CL and LS9)" : "Supported", "Analog Inputs" : "32", "Analog Input Connector" : "XLR-3-31 Type", "Analog Outputs" : "16", "AES/EBU Outputs" : "8 (4 stereo)", "AC Inlet" : "V-Lock Type", "Height" : "5 RU", "Sampling Frequency Rate" : { "External" : { "44.1 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "48 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "88.2 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "96 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0%" } }, "Signal Delay" : "Less than 3 ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25 ms (one way), Fs = 48 kHz", "Total Harmonic Distortion" : [ "Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 Ohms, Fs = 44.1 kHz, 48 kHz", "Less than 0.05% 20 Hz - 40 kHz @ +4 dBu into 600 Ohms, Fs = 88.2 kHz, 96 kHz", "INPUT to OUTPUT, Input Gain = Min." ], "Frequency Response" : [ "+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OUTPUT, Fs = 44.1 kHz, 48 kHz", "+0.5, -1.5 dB 20 Hz - 40 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OUTPUT, Fs = 88.2 kHz, 96 kHz" ], "Dynamic Range" : "108 dB typ., INPUT to OUTPUT, Input Gain = Min", "Crosstalk" : "-100 dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.", "Power Requirements" : { "US/Canada" : "120 V 60 Hz", "Japan" : "100 V 50/60 Hz", "China" : "110 - 240 V 50/60 Hz", "Korea" : "220 V 60 Hz", "Other" : "110 - 240 V 50/60 Hz" }, "Power Consumption" : "120 W", "Dimensions" : "18-7/8" W x 9-1/4" H x 14-1/4" D (480 x 232 x 362 mm)", "Net Weight" : "27.3 lbs (12.4 kg)", "Accessories" : "Dante Virtual Soundcard license sheet", "Temperature Range" : { "Operating" : "0° C to 40° C", "Storage" : "-20° C to 60° C" }, "Analog Input Characteristics" : { "Input Terminals" : { "Gain" : "+66 dB", "Actual Load Impedance" : "7.5 kOhms", "For Use with Nominal" : "50 - 600 Ohm mics and 600 Ohm lines", "Input Level" : { "Nominal" : "-62 dBu (0.616 mV)", "Max. Before Clip" : "-42 dBu (6.16 mV)" }, "Connector" : "XRL-3-31 type (balanced)" } }, "Analog Output Characteristics" : { "Input Terminals" : { "Actual Source Impedance" : " 75 Ohms", "For Use With Nominal" : "600 Ohm lines", "Max. Output Level Select SW*4" : "+24 dB (default)", "Output Level" : { "Nominal" : "+4 dBu (1.23 V)", "Max. Before Clip" : "+24 dBu (12.3 V)" }, "Connector" : "XLR-3-32 type (balanced)" } }, "Digital Input and Output Characteristics" : { "Terminal" : { "Format" : " Dante", "Data Length" : "24-bit or 32-bit", "Level" : "1000Base-T", "Audio" : "24-ch input/32-ch output", "Connector" : "EtherCON Cat5e" } }, "Digital Output Characteristics" : { "Terminal" : { "Format" : "AES/EBU professional use", "Data Length" : "24-bit", "Level" : "RS422", "Connector" : "XLR-3-32 type (balanced)" } } }