Talk to an expert
M-F 8am to 5pm PST
800-562-6006
info@ccisolutions.com

Yamaha Ro8-D Rackmount Stagebox Expander (RO8-D) - Digital

R series, Dante, 8-Output

Yamaha logo

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price

Availability
Ships directly to you from Yamaha
Usually Ships
2 to 3 Days
Item Number 
YAM-RO8D
Vendor Part
RO8-D

The Ro8-D model comes equipped with 8 XLR outputs and two Dante network connections, and is designed to complement the Rio3224-D and Rio1608-D stageboxes to offer expanded output capabilities. In the past, when you wanted to expand the audio I/O on your stage to accommodate more performers or to provide a more robust microphone setup, you usually had to deal with analog audio snakes with bulky, multi-cable connections and limited channel counts. Yamaha's R Series I/O racks take full advantage of Dante networking to provide exceptional flexibility and freedom in setup and placement while still offering natural, musical sound output while only needing to use a single Ethernet cable to connect between your console and stage box.

Features:

  • Sonic performance that brings out the best in any system
  • Dante network protocol contributes to greater system scalability and flexibility
  • Support for CL series consoles as well as other Dante based systems
  • Automatic digital-stage compensation for analog gain changes (CL series only)
  • Four models flexibly accommodate any system requirements

Specifications for the Yamaha Ro8-D Rackmount Stagebox Expander

{ "Sound Philosophy" : "Natural Sound Concept", "Grade" : "Inherit the sublime sound of the PM series", "Sampling Rate" : "44.1, 48, 88.2, 96 kHz", "Indicators" : "Signal", "Controllability from R Remote Software" : "Supported", "Maximum Number of Units Using HA Remotes Per System" : "Up to 8", "AD8HR Mode (HA Control from M7CL and LS9)" : "Supported", "Analog Outputs" : "8", "AC Inlet" : "V-Lock Type", "Height" : "1 RU", "Sampling Frequency Rate" : { "External" : { "44.1 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "48 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "88.2 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0% (±200 ppm)", "96 kHz" : "+4.1667%, +0.1%, -0.1%, -4.0%" } }, "Signal Delay" : "Less than 3 ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25 ms (one way), Fs = 48 kHz", "Total Harmonic Distortion" : [ "Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 Ohms, Fs = 44.1 kHz, 48 kHz", "Less than 0.05% 20 Hz - 40 kHz @ +4 dBu into 600 Ohms, Fs = 88.2 kHz, 96 kHz", "INPUT to OUTPUT, Input Gain = Min." ], "Frequency Response" : [ "+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OUTPUT, Fs = 44.1 kHz, 48 kHz", "+0.5, -1.5 dB 20 Hz - 40 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OUTPUT, Fs = 88.2 kHz, 96 kHz" ], "Dynamic Range" : "108 dB typ., INPUT to OUTPUT, Input Gain = Min", "Crosstalk" : "-100 dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.", "Power Requirements" : { "US/Canada" : "120 V 60 Hz", "Japan" : "100 V 50/60 Hz", "China" : "110 - 240 V 50/60 Hz", "Korea" : "220 V 60 Hz", "Other" : "110 - 240 V 50/60 Hz" }, "Power Consumption" : "35 W", "Dimensions" : "18-7/8" W x 1-3/4" H x 14-1/4" D (480 x 44 x 362 mm)", "Net Weight" : "9.7 lbs (4.4 kg)", "Accessories" : "Dante Virtual Soundcard license sheet", "Temperature Range" : { "Operating" : "0° C to 40° C", "Storage" : "-20° C to 60° C" }, "Analog Output Characteristics" : { "Input Terminals" : { "Actual Source Impedance" : " 75 Ohms", "For Use With Nominal" : "600 Ohm lines", "Max. Output Level Select SW*4" : "+18 dB", "Output Level" : { "Nominal" : "-2 dBu (616 mV)", "Max. Before Clip" : "+18 dBu (6.16 V)" }, "Connector" : "XLR-3-32 type (balanced)" } }, "Digital Input and Output Characteristics" : { "Terminal" : { "Format" : " Dante", "Data Length" : "24-bit or 32-bit", "Level" : "1000Base-T", "Audio" : "24-ch input/32-ch output", "Connector" : "EtherCON Cat5e" } } }